Skynyrd77's Thank Godamighty , Finally My Own WOPL Build Thread!!

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,251
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
Is it just setup diff then other 700's ? Is that why you have to figure out the wire route. Or is it something you've been trying to do for awhile now?
Exactly Jase, the ol mind has been churning on this for awhile....trying to lower the noise floor even more....
 

Skynyrd77

Veteran and General Yakker
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
Here's a dumb ass ? For whoever wants it. What is the diff between a quasi and a fully comp output??? Don't forget I need English so maybe orange shouldn't awnser this one for me. Lmfao
just giggin you orange kinda..
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,251
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
Jase, it's basically being able to use complementary outputs , the MJ21195, MJ21196 pairs as opposed to running all MJ 21196's and using a phase inverter in the driver. It's more symmetrical on output, better voltage balance , better distortion and bigger soundstage........not much.....


The big black wires on the BR are #12 silver/teflon (thanks Navo) this is a first for that position....
 

Attachments

Skynyrd77

Veteran and General Yakker
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
Jase, it's basically being able to use complementary outputs , the MJ21195, MJ21196 pairs as opposed to running all MJ 21196's and using a phase inverter in the driver. It's more symmetrical on output, better voltage balance , better distortion and bigger soundstage........not much.....


The big black wires on the BR are #12 silver/teflon (thanks Navo) this is a first for that position....
Oh ok ic how that could have its advantages.
 
Top