700B WOPL Audition List

Northwinds

Veteran and General Yakker
Joined
Mar 18, 2013
Messages
7,562
Location
Coventry, CT
Tagline
Fondler errrr... fan of all Nav's avatars
Jason, don't do any wiggling on the amp side, you might create a problem while figuring out a problem. Do the RCA's on the receiver seem to move at all when you "wiggle" them. Is the hum in BOTH channels or just one?
 

Skynyrd77

Veteran and General Yakker
Joined
Jan 12, 2014
Messages
3,971
Location
Mill creek Indiana
Tagline
lost in my own world
Jason, don't do any wiggling on the amp side, you might create a problem while figuring out a problem. Do the RCA's on the receiver seem to move at all when you "wiggle" them. Is the hum in BOTH channels or just one?
no everything is tight.im using audio quest ic and they are tight as hell on pole.and they dont wiggle at all!! and yes its both channels
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,932
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
Yes I did, and that's a pretty decent price for what he did. I would not have done it for that..
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,932
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
The price was right, AND you have hum, the dreaded hum monster, has driven many a good man crazy...
 

BubbaH

Veteran and General Yakker
Joined
Mar 13, 2013
Messages
3,315
Tagline
---
I have had so many hum issues over the years. Isolating the hum has sometimes been problematic. Even still I get noise from the electrical in here. Old panel, likely shitty wiring, as well as, poor circuit runs. I have lived in a lot of places in the last 10 years. Only place I had good electrical was in a room I reno'd in a place I lived at. I had installed 4 isolated circuits with 4" boxes and plaster rings allowing for 2 recepticals on each box.
 
Top