- Joined
- May 14, 2014
- Messages
- 2,293
- Location
- Southwest Kootenays BC
- Tagline
- No such things as bad days, just bad moments
I made a couple of posts in an AK thread about contact cleaner:
http://audiokarma.org/forums/index....-cleaning-switches-and-potentiometers.781838/
One is below from earlier today after I saw some stuff in the store I was in looking for cheap casters. I got curious about what was actually in the stuff and posted what I read. I feel like I know people here well enough to trust their opinions so am curious as to what you guys think
<article>
http://audiokarma.org/forums/index....-cleaning-switches-and-potentiometers.781838/
One is below from earlier today after I saw some stuff in the store I was in looking for cheap casters. I got curious about what was actually in the stuff and posted what I read. I feel like I know people here well enough to trust their opinions so am curious as to what you guys think
<article>
"So this subject of contact cleaners interested me enough to see what, if any, brands were sold in stores I happened to be in. This afternoon I saw one made (in Canada) by Lloyd's Laboratories (since 1919) called Kleens-It. A 20oz spray can with straw is $7.99.
There are only two ingredients listed - tetrachloroethylene aka perchloroethylene aka PERC and carbon dioxide. The first component, I read, was described as a refrigerant and an organic solvent widely used in dry-cleaning. That sounds like it could be the successor to carbon-tetrachloride and was that not considered a desirable chemical for electrical contact cleaning? The label said it is compatible with most plastics except styrene.
I tried finding out what was in De-Oxit. It contains tetrafluoroethane (also considered a refrigerant) aka freon and mineral oil. According to Wikipedia, tetrafluoroethane is "about to be considered" as an organic solvent.
I'm obviously not a chemist but since both these products contain a similar (by intended purpose) main ingredient, would that not make De-Oxit at over $20 for a couple of ounces a bit of a rip off if the only other additive was mineral oil?"
</article>There are only two ingredients listed - tetrachloroethylene aka perchloroethylene aka PERC and carbon dioxide. The first component, I read, was described as a refrigerant and an organic solvent widely used in dry-cleaning. That sounds like it could be the successor to carbon-tetrachloride and was that not considered a desirable chemical for electrical contact cleaning? The label said it is compatible with most plastics except styrene.
I tried finding out what was in De-Oxit. It contains tetrafluoroethane (also considered a refrigerant) aka freon and mineral oil. According to Wikipedia, tetrafluoroethane is "about to be considered" as an organic solvent.
I'm obviously not a chemist but since both these products contain a similar (by intended purpose) main ingredient, would that not make De-Oxit at over $20 for a couple of ounces a bit of a rip off if the only other additive was mineral oil?"