AHA!! No bias voltage...what resistor was that Joe....R75?
laatsch55 Administrator, Staff member May 5, 2014 #421 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #421 AHA!! No bias voltage...what resistor was that Joe....R75?
Gepetto Administrator Staff member May 5, 2014 #422 Joined May 15, 2011 Messages 14,098 Location Sterling, MA Tagline Old 'Arn Enthusiast May 5, 2014 #422 laatsch55 said: AHA!! No bias voltage...what resistor was that Joe....R75? Click to expand... R75/76 it can blow open under your heavy prior abuse. It will not show any signs of overwattage, just goes open...
laatsch55 said: AHA!! No bias voltage...what resistor was that Joe....R75? Click to expand... R75/76 it can blow open under your heavy prior abuse. It will not show any signs of overwattage, just goes open...
laatsch55 Administrator, Staff member May 5, 2014 #423 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #423 Not gonna be that easy, R35 is now 7.24K ohms....
laatsch55 Administrator, Staff member May 5, 2014 #424 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #424 R35 replaced witha 1 ohm 1/4 warr MO. Left channel R35 also out of spec, it was reading 10.5 ohms. Bias now holding 385mv. Back on the AP....
R35 replaced witha 1 ohm 1/4 warr MO. Left channel R35 also out of spec, it was reading 10.5 ohms. Bias now holding 385mv. Back on the AP....
Gepetto Administrator Staff member May 5, 2014 #425 Joined May 15, 2011 Messages 14,098 Location Sterling, MA Tagline Old 'Arn Enthusiast May 5, 2014 #425 laatsch55 said: R35 replaced witha 1 ohm 1/4 warr MO. Left channel R35 also out of spec, it was reading 10.5 ohms. Bias now holding 385mv. Back on the AP.... Click to expand... Looks like those 1 ohm fuses did their job. Now that you have the wire relocated from the backplane, that should not occur again.
laatsch55 said: R35 replaced witha 1 ohm 1/4 warr MO. Left channel R35 also out of spec, it was reading 10.5 ohms. Bias now holding 385mv. Back on the AP.... Click to expand... Looks like those 1 ohm fuses did their job. Now that you have the wire relocated from the backplane, that should not occur again.
laatsch55 Administrator, Staff member May 5, 2014 #426 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #426 Yep, clian and green on the scope too.. back on the K's while Timdalf's gets a new lightboard...
laatsch55 Administrator, Staff member May 5, 2014 #427 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #427 THE PIG LIVES-AGAIN!! Attachments SAM_0109.jpg 92.1 KB Views: 50 SAM_0108.jpg 90.9 KB Views: 62
Gepetto Administrator Staff member May 5, 2014 #428 Joined May 15, 2011 Messages 14,098 Location Sterling, MA Tagline Old 'Arn Enthusiast May 5, 2014 #428 laatsch55 said: THE PIG LIVES-AGAIN!! Click to expand... Oink, oink! my good man...
laatsch55 Administrator, Staff member May 5, 2014 #429 Joined Jan 14, 2011 Messages 75,023 Location Gillette, Wyo. Tagline Halfbiass...Electron Herder and Backass Woof May 5, 2014 #429 Thanks Joe, this is still one BAD ASS little 400...DAYAM!!