The 25 700B's Look Like A Done Deal
- Thread starter laatsch55
- Start date
Skynyrd77
Veteran and General Yakker
Ive nvr had a payment on a car. Just can't justify it.
Skynyrd77
Veteran and General Yakker
Thanks Kev for the awnser to my wtf ? Lol
Nick Danger
Veteran and General Yakker
- Joined
- Apr 28, 2013
- Messages
- 2,777
Lee, if you need somebody to build some boards, power cords, adverstising, working the RMAF(if you decide to go), testing
, etc., I would be glad to help out in any capacity. I could send a deposit(?) as well. just let me know......
, etc., I would be glad to help out in any capacity. I could send a deposit(?) as well. just let me know......
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Thanks Doug, no need for a deposit, I have most of the parts already....
Nick Danger
Veteran and General Yakker
- Joined
- Apr 28, 2013
- Messages
- 2,777
When should I come by to pick up the components and start assemblin'?
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Want to try a Joe driver board?
Nick Danger
Veteran and General Yakker
- Joined
- Apr 28, 2013
- Messages
- 2,777
Absolutely.
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Ok, I'll bag up some stuff and send it your way...might take me a day or two...
Nick Danger
Veteran and General Yakker
- Joined
- Apr 28, 2013
- Messages
- 2,777
Perfect. I will get her assembled and sent back to you ASAP. Will I need any thermal paste for this build?
Zach C.
Journeyman
Yeah, bad edit on my part.
No payment.
I'm a cash guy as much as possible.
Did take a mortgage, but paid that off early.
I don't understand why folks are so anxious to give away money.
Good things come to those who wait doesn't just apply in the bedroom.
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
No, a soldering iron. A small pair-o-dykes....
Rex Everything
Shpongled
- Joined
- Jan 14, 2011
- Messages
- 75,407
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
You can build your own White I
Oak boards then!!
Oak boards then!!
Skynyrd77
Veteran and General Yakker
Yeah Paul build your own shit!!! Lol
Rex Everything
Shpongled
OUCH!
Northwinds
Veteran and General Yakker
- Joined
- Mar 18, 2013
- Messages
- 7,572
- Location
- Coventry, CT
- Tagline
- Fondler errrr... fan of all Nav's avatars
Well, it was a fun trip. Very happy to meet Joe and Dennis was a great guy also. Dennis took us on a tour of the building and man, there is so much stuff in there. Every kind of PA related equipment you can think of. Hafler and Yamaha amps stacked in places. EV drivers galore. You could spend a day at looking at all the boxes and shelfs!
Anyway, here is an image of Joe and I standing in front of a very historical piece. Some of the original Altec VOTT's used at WOODSTOCK!!!!!!!!!!!
Big mofo!!!
Nando, even found something cool for you to see LOL
So, finally sitting down and taking a break. You carry 22 amplifiers back and forth a couple times and you will feel it indeed
Here you go Lee, all stacked up and just waiting for when you need them
Joe, it was a pleasure meeting you Brother. Your even cooler in person!
Anyway, here is an image of Joe and I standing in front of a very historical piece. Some of the original Altec VOTT's used at WOODSTOCK!!!!!!!!!!!
Big mofo!!!
Nando, even found something cool for you to see LOL
So, finally sitting down and taking a break. You carry 22 amplifiers back and forth a couple times and you will feel it indeed
Here you go Lee, all stacked up and just waiting for when you need them
Joe, it was a pleasure meeting you Brother. Your even cooler in person!
Last edited:
Was a good day in Lawrence (and you don't say that too often), beautiful weather to boot. Had a good time chatting with Ron and Dennis about all the nostalgic stuff in that warehouse.
Great meeting you Ron and putting a face to your name. Something tells me that Ron may make his way back to Hanley's warehouse again
Great meeting you Ron and putting a face to your name. Something tells me that Ron may make his way back to Hanley's warehouse again
Northwinds
Veteran and General Yakker
- Joined
- Mar 18, 2013
- Messages
- 7,572
- Location
- Coventry, CT
- Tagline
- Fondler errrr... fan of all Nav's avatars
Was a good day in Lawrence (and you don't say that too often), beautiful weather to boot. Had a good time chatting with Ron and Dennis about all the nostalgic stuff in that warehouse.
Great meeting you Ron and putting a face to your name. Something tells me that Ron may make his way back to Hanley's warehouse again
Yep, I want that digital delay he showed us that was used for the Aerosmith tour!!!! So much cool stuff to see and this is just one spot for overflow
Man, I would love to bring that Altec setup back home someday but I would imagine it would require winning the lottery. Could you imagine a few WOPL1000's driving those beasts again?
Joe, one of those 700Bs seems to weigh significantly more then the others...
Skynyrd77
Veteran and General Yakker
Damn guys looks like a awesome musical day all around . Man sound like some cool stuff in there. Stuff from Woodstock and Aerosmith stuff hell yeah. Where did this all get accumulated from. A showco type company or what?