Rick Stout's Pioneer Spec 4

Rick's Spec4 getting some shakedown time. Got the famous Spec bass for sure!! Sounding good!!
 

Attachments

  • 100_2710.jpg
    100_2710.jpg
    96.6 KB · Views: 50
  • 100_2709.jpg
    100_2709.jpg
    93.4 KB · Views: 50
Test btime, don't know what to think about this fellers, spooky...
 

Attachments

  • Rick Stout's Spec 4 THD & N Left.jpg
    Rick Stout's Spec 4 THD & N Left.jpg
    99.7 KB · Views: 66
  • Rick Stout's Spec 4 THD & N Right.jpg
    Rick Stout's Spec 4 THD & N Right.jpg
    92.2 KB · Views: 64
Other measuements... Fellers this is good, way good, Never seen numbers like this... Left channel THD & N coming up and FR after that.
 

Attachments

  • Rick Stout's Spec 4 Others.jpg
    Rick Stout's Spec 4 Others.jpg
    86.9 KB · Views: 57
Look at the scale !!!! Who gives a F&^% at that level, way past audible, can't hear it either...

Yeah I know - it's so far in the mud that it is a don't care but it did give me a chance to give you a minor dig. That is scary good by the way.
 
Jeez......
 

Attachments

  • Rick Stout's Spec 4  THD & N Left -Table.jpg
    Rick Stout's Spec 4 THD & N Left -Table.jpg
    97.2 KB · Views: 56
  • Rick Stout's Spec 4  THD & N Left.jpg
    Rick Stout's Spec 4 THD & N Left.jpg
    88.3 KB · Views: 52
Frequency response/....
 

Attachments

  • Rick Stout's Spec 4  Frequency Response-Graph.jpg
    Rick Stout's Spec 4 Frequency Response-Graph.jpg
    90 KB · Views: 55
  • Rick Stout's Spec 4  Frequency Response-Table.jpg
    Rick Stout's Spec 4 Frequency Response-Table.jpg
    98 KB · Views: 56
Yeah, I'd like to run down the street beating my chest and screaming, but I don't know what I did different than Chris' Spec 4 sittin right here. I'll have to retest his as I have built some new cables.....
 
Just for makesures....
 

Attachments

  • Rick Stout's Spec 4   AP Self-Test Pg 2.jpg
    Rick Stout's Spec 4 AP Self-Test Pg 2.jpg
    94.6 KB · Views: 34
  • Rick Stout's Spec 4   AP Self-Test.jpg
    Rick Stout's Spec 4 AP Self-Test.jpg
    99.4 KB · Views: 27
Not yet Scott. I'll do that when I set the current limiters. They will be set to engage at 175 watts at 8 ohms. I've listened top it for 3 days now, still wouldn't trade the Pig for it.
 
Really hate to even move the thing, gotta set the current limiters then move it for a mule test though. Any other tests that could be done??
 
Rule #1 Check your test equipment.
Rule #2 Refer to rule #2

Thinking the THD & N figures were not realistic, I started to check my test equipment. My load bank had an intermittent in the cintrol box. Revised figures for THD & N coming up.
 
Still Spooky Good....
 

Attachments

  • Rick Stout's Spec 4  THD & N Right #2 Graph.jpg
    Rick Stout's Spec 4 THD & N Right #2 Graph.jpg
    86.8 KB · Views: 39
  • Rick Stouts Spec 4  THD & N Right #2 Table.jpg
    Rick Stouts Spec 4 THD & N Right #2 Table.jpg
    98.2 KB · Views: 36
Lee emailed me and commanded me to come look at this thread. I had only discovered it existed a day or so ago but hadn't commented about it yet. He is an unforgiving taskmaster so I popped right in here to acknowledge his good work.

Lee, I don't know what you are doing, but I'm sure you do and I hope you are having fun doing it.

Rick
 
I wish I knew what made it this good. Wipes the factory specs ass. Factory calls for .01 % THD & N.
 
Lee emailed me and commanded me to come look at this thread. I had only discovered it existed a day or so ago but hadn't commented about it yet. He is an unforgiving taskmaster so I popped right in here to acknowledge his good work.

Lee, I don't know what you are doing, but I'm sure you do and I hope you are having fun doing it.

Rick

Watch out for Lee - he'll kick your ass if you don't comply! :laughing9: Don't remember if I said this before but welcome - you may never be the same again!!
 
Back
Top