RCA plugs / contacts

Do you guys prefer the KANGneei WBT connectors or the COOL STAR WBT connectors... :-)
 
Fugged if I know, Steve bought a bunch one time I used on all his stuff, I don't remember what series it was Joe..
 
Gepetto said:
Just gigging Lee. Those are the Chinese knock off brands of WBT connectors on Amazon. You have to have a lot of brass to list your knock offs under the WBT name and part number.
Click to expand...


At one time, I found the Chinee knock off of the Cardas RCA's but only saw them once, none since. They weren't any cheaper though.
 
I know switchcraft are quality. We used them for all the “open” 1/4” jacks in our guitars. I also have one in my WP-2 headphone amp- they just work… forever.

Inhavent used their RCAs but I suspect theyd be fine.

I’ve used Neutrik (Rean) RCA panel jacks in my builds. Those are fine. I haven’t used their cable ends however.
 
laatsch55 said:
You are close to Germany, check out WBT...
Click to expand...
Have checked yesterday, probably good stuff but not cheap. I mean, we're trying to find a balance. Something that will do a good job, will last over the time and is not Sci-Fi. Such a plugs obviously can't be find for a 1$. At the other side Amphenol seems to be one of those that will do a good job for about 2$/pcs, so 8$/cable + cable itself. Not cheap either considering to how many cables a one need, but can be acceptable as a one time investment.
 
If you’re making a lot of cables, check the quantity pricing. Mouser at least lowers the price as you buy more.

And note that some colors cost less than others too. I guess it’s popularity but that’s what I saw. I for some in other colors for digital cable ends.
 
WOPL Sniffer said:
I think their rca's are cheesy
Click to expand...

Switchcraft is from before the era of cable needing to be jewelry and just does the job. Not a lot of extra metal. The extra metal brand is Canare and Connectronics both available from Markertek. They also have Rean which I have read good things about.

Those two extra metal brands are big connectors.
 
Rean is Neutrik. They are decent.

I prefer Neutrik for XLR connectors.
 
J!m said:
If you’re making a lot of cables, check the quantity pricing. Mouser at least lowers the price as you buy more.

And note that some colors cost less than others too. I guess it’s popularity but that’s what I saw. I for some in other colors for digital cable ends.
Click to expand...

Hey Jim
Any comment on the differences between the APCL and APCR series of Amphenol RCA plugs? Do you know what the big difference is?
 
I THINK it is the gunmetal finish or not, but not certain.
 
You must log in or register to reply here.
Back
Top