Skynyrd77
Veteran and General Yakker
Should of nvr ask if Kyle sees it he will explain it to me for a week!!!!
Przem's Phase Linear 700 Series II White Oak Conversion
- Thread starter laatsch55
- Start date
Should of nvr ask if Kyle sees it he will explain it to me for a week!!!!
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Ask Lee, or ask Webster......Webster may be clearer...
Skynyrd77
Veteran and General Yakker
Your deff is prob more to the point... But with a twist... Lol and no orange lime added lmao
You wanna do a major disaster to her, Lee? After all she did to me? Spending her whole life at 5 ohm all the time and never going wrong way? Definitely I am the one setting off in fear and trepidation… !
By the way the noise readings were excellent, right?
Do not put her in fire, please....
You broke her in right Przem - she doesn't droop when stressed while driving a big load. She is a good girl and she's hot!
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yes Przem. Whatever you did to her before you did well
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Przem, I will not test the amp to deztruction. And yes, I have some transistor covers.
Skynyrd77
Veteran and General Yakker
I think you scared ppl lee when we tried to get fire out of mine lmfao !!!
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yeah. I think so.
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
I wouldn't hurt your amp Przem...
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
With one of my amps anything is possible, but a customers amp.........with an obsolete IC in it, I'm cool....
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jun 11, 2010
- Messages
- 6,935
- Location
- Powhatan, Virginia, United States
- Tagline
- WassupYa Mang?
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
hehe...
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
premiumplus
Chief Journeyman
The driver transistor heat sinks go on last. I put them on later to keep from knocking the transistors around while I do the wiring...I bet Lee does the same, but I'm sure he'll check in directly...
You're going to love this amplifier. I think mine are the best amps I've ever heard and they aren't even full comp (yet). I'm not in a big rush to do it though...I've heard Levinson monoblocks that sound flat in comparison. And those monoblocks were the big ones, set up for 240 volt operation (unusual here in the USA, we run 120 VAC house current). The WOPL 1000s sounded better in every way.
You will be a trend setter in Europe for sure!
You're going to love this amplifier. I think mine are the best amps I've ever heard and they aren't even full comp (yet). I'm not in a big rush to do it though...I've heard Levinson monoblocks that sound flat in comparison. And those monoblocks were the big ones, set up for 240 volt operation (unusual here in the USA, we run 120 VAC house current). The WOPL 1000s sounded better in every way.
You will be a trend setter in Europe for sure!
- Joined
- Jan 14, 2011
- Messages
- 75,551
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yep, the heat sinks go on last.
Skynyrd77
Veteran and General Yakker
Coming right along!! Get ready Europe for a WOPL movin in...
Hurray, it's happening!!!!!!! Had to leave for a couple of days and didn't see first posts on the progress made.
Thank you Lee - wonderful beginning of the week and summer season!
By the way, will this be the first 'European' WOPL Series II conversion?
P.S.
I see no heatsinks for the driver board transistors - TBA at a later stage ?
Yes, US only on Series 2 up to this point.