PL14_20 RevE6 versus PL14_20 RevG1 Dual Mono?

[TravK]

Apologies, as I figure this has probably been addressed elsewhere, but I'm curious about the differences between E6 and G1. Perhaps there are release notes for the two that are available for compare and contrast? Thanks all!

 

[laatsch55]

Coontact Gepetto, he can e-mail those for ya...


Basically the G board is dual mono, having separate power supplies and and totally separate circuitry.

The E 6 variant does share power supplies...

 

[Gepetto]

Here you go Travis

 

[laatsch55]

Thank you Sir Joe!!

 

[TravK]

I echo the sentiment. Thank you very much!

 

[TravK]

Appreciate the detail in these notes, fwiw. I sort of geek out on this sort of thing (I work construction in an industrial setting, and not having details on the latest revision to plans has bitten me in the ass before).

 

[Gepetto]

Appreciate the detail in these notes, fwiw. I sort of geek out on this sort of thing (I work construction in an industrial setting, and not not having details on the latest revision to plans has bitten me in the ass before).

The geek here appreciates that comment

 

[laatsch55]

The head geek speaketh..,

 

[WOPL Sniffer]

HUH???? I'll be the judge of that

 

[Northwinds]

Perry and some dear friends kicked in and built me a top tier Clair Brothers chassis 700 series 2 which sports the G1 board and everything thing else latest goodies even down to silver wiring. I run a dual mono Class A preamp so it just makes an already amazingly great thing even better. Zero crosstalk, no noise literally a black hole, seemingly infinite power at my finger tips until the 400w's the D9s will give me run out of power handling then I back off a hair and just still sit stupefied by what I am hearing. Bass that will shake your soul. Highs and mids that sing like a seasoned choir. Just ask a few guys like Dan who have been to my house and handed over control. Do you need it? If you run a dial mono preamp then I would say yes. Regardless, the separation of channels makes the Soundstage even more apparent

If I were to add anything else to this point, I woukd not know what I was talking about as I am no techno geek. Perry and the others are the Pros, i am just a set of happy ears

 

[Fishoz]

Well look who's back and posting!! Hey Ron!

 

[J!m]

The only thing to add is a second amp and run full dual mono. That made a huge improvement for me, plus having the amps right next to each speaker with the shortest possible speaker cable, to help the amp control the cones (increased damping factor).

All good!

(But I don't use Phase Linear amplifiers)

 

[mlucitt]

The only thing to add is a second amp and run full dual mono. That made a huge improvement for me, plus having the amps right next to each speaker with the shortest possible speaker cable, to help the amp control the cones (increased damping factor).

All good!

(But I don't use Phase Linear amplifiers)

Jim, you are missing out on a bucket list item if you don't hear the WOPL at Mach 10 at least once in your life. Seriously, they are that good.

 

[Northwinds]

Well look who's back and posting!! Hey Ron!

Hey brother, have not been myself for quite awhile but trying to make it back. Is Stuwee still around?

 

[Fishoz]

He's popping in now and again. Still kicking but a bit subdued.....as should be!

Always good to hear from ya.

 

[FredR]

Good to hear from you Ron. Take care my friend.

 

[J!m]

If I get the opportunity to hear a WOPL I will. I don’t know anyone near me with one.

 

[laatsch55]

Glad to see ya back Ron. Nasty looking guitar...

Jim, you need to hear one..

 

[J!m]

Not arguing!