PL-700 OTW

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,798
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#1
Heading to Suwanee Ga. In just a few to pick up a nice PL 700. Pictures to come. I am excited as hell I ain't gonna lie. I have been looking for one for a very long time that was affordable. $380.00 working in great shape.
[h=2]Hot Damn ![/h]
 

bill7621

Chief Journeyman
Joined
Jan 31, 2016
Messages
585
Location
Berlin Center, Ohio
Tagline
WTF, y'all
#2
Congratulations. That is a good price. They don't seem to come cheap anymore. I've watched non working go for way too much money, but that's the way it seems to be.
 

Bradrock

Veteran and General Yakker
Joined
Jun 7, 2017
Messages
1,563
Location
Alton Mo.
Tagline
---I run with Scissors
#5
You need to drive back over there and give the guy some more money. One just sold on Ebay for $545.00 yesterday.I put money in my ppal acct. to buy it & thought about it too long. I've seen them go for $1,200.00 just in my short time here. I bought a swell 700b from Lee, but now I wan't at least one of each model amp.
What a great start on your new listening room your going to add on soon. 700 watts needs some room & worthy speakers too!
 

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,798
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#7
God thanks Northwinds. I had started to feel like I had made a mistake in buying the PL 700 instead of a 700b because I see now that these meters will not fit a new face plate..
 

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,798
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#8
Bradock, there you go reading my mind again. Yes, I do need a bigger listening room. The one I have is so small its not even funny. So guys, where do I go from here. I checked and set DC offset only the left channel needed much adjusting. I have not checked bias or hooked any test speakers up. I have not checked bias because I cannot read the schematic I have for the PL 700. I have tried a few copy's I downloaded from a few sites but cannot hardly read either one and therefore I am not 100% sure what two resistors are R 47 and R 48. Nothing has been touched on this unit as far as I can see from day one. All the OPT are factory 909's. Here are a few images from today after I went in and poked around. It looks like I screwed myself by not finding a B unit as well. These meters are completely different than the B and therefore will never fit in a new face plate...

20180219_084312.jpg 20180219_105547.jpg 20180219_105623.jpg 20180219_105831.jpg 20180219_113101.jpg 20180219_113144.jpg
 

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,798
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#9
Found the correct resistors to read across but the adjustments have been glued I would guess from the factory. What to do here ? Go ahead and get the glue loose anyway right ? One (left side) is sitting around .450 the other around .115
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,124
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#10
There are 2 variable resistors for each channel. Read the manual to get a clear idea how todoit...
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,124
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#11
Thats for the offset, bias is another one...be sure to get a manual for the PL0171 pcb.....I'm not home or us would post the procedure andsdchematic .....Perhaps someone else could,??
 

VSAT88

Veteran and General Yakker
Joined
Sep 7, 2017
Messages
1,798
Location
Phenix City Alabama
Tagline
Like my BlueTooth ?
#12
Broke the glue loose and I am adjusting R 36 (VR-POT) for Bias. I cannot get the bias on the left chan above .131
The right channel will adjust. I have it at .350
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,124
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#20
Yes. Turned the pot all the way left and adjusted R 17 . Then turned the pot all the way right and adjusted R 7 on both channels. Both are very close to 0 Mv on a 200 mV scale.

Ok, justcheckin bud....the bias trannt is on theboard. On the channel that won't adjust, hold the bias trannywith your fingers and see if it changes as you warm it up..
 
Top