Milwaukee Fuel M18 1/2" Impact.

laatsch55

laatsch55

Administrator,
Staff member
#3
Joined
Jan 14, 2011
Messages
74,823
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#3
Are those permanent magnet motors? They are hell just to get apart....
 
Bob Boyer

Bob Boyer

Veteran and General Yakker
#8
Joined
Apr 24, 2013
Messages
3,035
Location
Chattanooga, TN
Tagline
---
#8
laatsch55 said:
Anybody been in theirs yet?. Mine got intermittent. Lots of flotsam jetsam in between the leads of the IRLS 3034-7P.. cleaned those up. Pretty rough in there..
Click to expand...
Haven't used mine enough for it to behave as if it needs a teardown but yeeesh, that's dirty. That may be something to expect on my drill, however, as I use it a fair bit in the workshop and running trailer stabilizers up and down.
 
laatsch55

laatsch55

Administrator,
Staff member
#11
Joined
Jan 14, 2011
Messages
74,823
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#11
Finished the clean up, continuity checks, etc. Don't know shit about mosfets, but, like anything else, if there's shit between the leads that's a bad thing. SMD stuff, it looks to have been hot enough to melt some excess solder away from the power mosfet leads but I wouldn't swear to it.. Sooooo0..... A Milkwaukee 1/2" Model 2763 lives. On the way home from the rig today bought a backup to the 2763, a High Torque model 2967....
 

Attachments

laatsch55

laatsch55

Administrator,
Staff member
#13
Joined
Jan 14, 2011
Messages
74,823
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#13
8991XJ said:
Yours probably gets the most severe duty so doubtful any of us have been inside as they are still working just fine.


Or a typical pit stop.

Seems there are a few companies making them for this gun.
Click to expand...

Yeah we're pretty hard on that shit out here...
 
8991XJ

8991XJ

Chief Journeyman
#14
Joined
Oct 8, 2011
Messages
1,212
#14
I'm still at home using air and bought Craftsman ½" impact gun. It has 600 in reverse which seems to be good for the shadetree mechanic. That high torque model, 1100 install and 1700 in reverse would break a lot of the puny €-M12-M14 bolts I work with. I would not consider it adequate to use at the pulp mills I worked at which use industrial sized nuts and bolts.

Glad to say the Craftsman is made by Ingersol Rand and has been a great gun for years.
 
laatsch55

laatsch55

Administrator,
Staff member
#15
Joined
Jan 14, 2011
Messages
74,823
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#15
I had pneumatic Blue Point and IR for years, carried 1" drive for the onery pumping unit bolts, which went to 2-1/2"....no electric replacement or this stuff....but for the few minutes I work em anymore....Love Em!!
 
J!m

J!m

Veteran and General Yakker
#16
Joined
Dec 24, 2019
Messages
10,685
Location
Connecticut
Tagline
BOT
#16
I have a brand new still in the oily bag IR air impact probably from the 80’s. I have a 110v impact that’s good enough (also IR) that obsoleted my air ones.

Interested in a trade anyone?
 
You must log in or register to reply here.
Top