Leader LMV-185A MILLIVOLMETER

[laatsch55]

Almost forgot about this little cutie. Last time I used it the meters would not settle down. It was an open 47 ohm / 1 watt resistor in the floating ground section. Easy fix. Calibrated with the ATS-1DD... don't know if it can double as a voltmeter calibration but it is good to 5mv in the generator department. Cald good at 1 volt, 10 volt, and 1 volt at 400 hz and 50k hz. I think it will be just fine..

 

[George S.]

I really like mine, a marvelous piece of analog test equipment. Well worth saving!

 

[laatsch55]

Have to agree with ya there..

 

[Gepetto]

Almost forgot about this little cutie. Last time I used it the meters would not settle down. It was an open 47 ohm / 1 watt resistor in the floating ground section. Easy fix. Calibrated with the ATS-1DD... don't know if it can double as a voltmeter calibration but it is good to 5mv in the generator department. Cald good at 1 volt, 10 volt, and 1 volt at 400 hz and 50k hz. I think it will be just fine..

That's a big one Lee...

 

[laatsch55]

It's a big cutie?

 

[Gepetto]

It's a big cutie?

It looks decently made, before the bean counters swooped in.

 

[laatsch55]

Absolutely Joe, excellent build quality!