Leader LMV-185A MILLIVOLMETER

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,382
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
Almost forgot about this little cutie. Last time I used it the meters would not settle down. It was an open 47 ohm / 1 watt resistor in the floating ground section. Easy fix. Calibrated with the ATS-1DD... don't know if it can double as a voltmeter calibration but it is good to 5mv in the generator department. Cald good at 1 volt, 10 volt, and 1 volt at 400 hz and 50k hz. I think it will be just fine..
 

Attachments

  • 20241124_230113.jpg
    20241124_230113.jpg
    1 MB · Views: 19
  • 20241124_191945.jpg
    20241124_191945.jpg
    1.3 MB · Views: 19
I really like mine, a marvelous piece of analog test equipment. Well worth saving!
 
Almost forgot about this little cutie. Last time I used it the meters would not settle down. It was an open 47 ohm / 1 watt resistor in the floating ground section. Easy fix. Calibrated with the ATS-1DD... don't know if it can double as a voltmeter calibration but it is good to 5mv in the generator department. Cald good at 1 volt, 10 volt, and 1 volt at 400 hz and 50k hz. I think it will be just fine..
That's a big one Lee...
 
Back
Top