Johan's Phase Linear 700B Fully Comp Conversion

And took the AC neutral run from out of the lower bundle and run it up north, got er figured out.
 
This batch of heatsinks have the extreme top and bottom mounting holes way off. Looks like .030 at least. The holes between these extremes would have gone with no problem. Always something....
 
laatsch55 said:
And took the AC neutral run from out of the lower bundle and run it up north, got er figured out.
Click to expand...

Yes, that picture shows pretty clearly how all the AC wires break out. The lower run inside the tubing heads directly for the faceplate where I keep it low and head left over to the AC switch. It is important to have a gazinta and a gazouta on the AC wiring paired together to provide the canceling field.
 
Can the AC going to the switch(faceplate) be broke out and bundled by itself? Or was that what you were referring to?
 
laatsch55 said:
Can the AC going to the switch(faceplate) be broke out and bundled by itself? Or was that what you were referring to?
Click to expand...

Yes you can see that in the 3rd picture Lee. Look at the lower right of the photo and you will see the 2 jacketed wires running to the faceplate switch breaking out right at the fuseholder.
 
Black wire comes off the fuseholder , enters the loom, goes to the switch, comes back from switch inside the same loom exits at the fuse holder and continues on to the accessory receptacle..
 
laatsch55 said:
Black wire comes off the fuseholder , enters the loom, goes to the switch, comes back from switch inside the same loom exits at the fuse holder and continues on to the accessory receptacle..
Click to expand...

Correct Lee.
 
I like that idea, keeping that out of the meter wire bundle..
 
A little progress now that we have music..
 

Attachments

  • DSCN0559.jpg
    DSCN0559.jpg
    100 KB · Views: 57
Had to do some switch surgery. Ine of the tabs on the Direct/Normal coupling sweitch had one of the tabs "rolled" out so the slider nubbin was cockeyed. Took the switch apart relocated the tab with some strategic bends and popp[ed it back together. It now has that "snap" of a properly detented switch. Lee 1--amp --0
 
laatsch55 said:
Had to do some switch surgery. Ine of the tabs on the Direct/Normal coupling sweitch had one of the tabs "rolled" out so the slider nubbin was cockeyed. Took the switch apart relocated the tab with some strategic bends and popp[ed it back together. It now has that "snap" of a properly detented switch. Lee 1--amp --0
Click to expand...

They used such cheap ass components in these PL amps, makes you wonder what they were thinking.
 
A world famous amp derailed by a 3.00 switch, indeed what were they thinking..
 
You must log in or register to reply here.
Back
Top