Jim's 400 Series II

jbeckva

jbeckva

Admin/Server Dude MAA Guy
Staff member
Joined
Jun 11, 2010
Messages
6,932
Location
Powhatan, Virginia, United States
Tagline
WassupYa Mang?
Got a guy over from AK that Ron let me know about a few months ago. In for a wopl'ing is a nice series II. Got it torn down, and now it's time for parts to become another schweet sounding power amp. :headbang:
.5 already down.jpg

Parts story, so far...

1-JoeParts.jpg

And, time to get busy with the standoffs on the back-planes.:glasses2:

2-standoffs.jpg
 
i'm the guy...

damn, when you say 'stripped down' you mean STRIPPED down---i look forward to this, and thanks for your help, Jerry
 
shrinkboy said:
damn, when you say 'stripped down' you mean STRIPPED down---i look forward to this, and thanks for your help, Jerry
Click to expand...

Yessir.. the chassis is outside the door in the box. I'll be taking the xformer off too.. nothing stays as it is hehe

Standoffs are done.. time to populate the backplanes..

3-soffdone.jpg
 
shrinkboy said:
damn, when you say 'stripped down' you mean STRIPPED down---i look forward to this, and thanks for your help, Jerry
Click to expand...

You're in good hands with Jerry - he's top notch. I really like the looks of the Series II PL amps.
 
Getting there, guys.. I have new speaker posts coming for the DCP (dang thought I ordered em with the DCP components).
Don's a bit out of pocket tho, so not sure when the DCP board and chip will be here.. :scratch:

6-bpsinstalled.jpg
 
Northwinds said:
RAWK :headbang:
Click to expand...

LOL hey Ron... here's what is waiting in the wings. Just need to go down and get some screwz.. Yep, this was the one you had sent a few years back. Dingbat me - I found out about 2 years ago that it's real problem was me knuckle-dragging one of the outputs. Didn't see it until I robbed 'em for a wopl build long ago, where one of the pins was bent while installing it! Dagnabit.. well, it'll be ebayed prolly when I'm done! :headbang:

7-whilewewaitLOL.jpg
 
jbeckva said:
Yeah man, they're nice. One of these days I'll get a series II for me own...
Click to expand...

IF you look in Heads Up! I posted a forlorn pound puppy 400 that's on eBay you might be able to rescue.
 
amp!!

so i got a PM from Jerry over on AK saying the amp is done, is in testing, and to look for pix here, soon...but, where are they, Jerry? many thanks for all your help on this.
 
jbeckva said:
LOL hey Ron... here's what is waiting in the wings. Just need to go down and get some screwz.. Yep, this was the one you had sent a few years back. Dingbat me - I found out about 2 years ago that it's real problem was me knuckle-dragging one of the outputs. Didn't see it until I robbed 'em for a wopl build long ago, where one of the pins was bent while installing it! Dagnabit.. well, it'll be ebayed prolly when I'm done! :headbang:

View attachment 30814
Click to expand...

That was a damn fine amp Jer aside from that slight buzzing
 
the amp shipped safely and fully WOPL'd by Jerry, and it is probably the best upgrade i've ever done in my system. many, MANY thanks to Jerry for his fine work

shrinkboy said:
so i got a PM from Jerry over on AK saying the amp is done, is in testing, and to look for pix here, soon...but, where are they, Jerry? many thanks for all your help on this.
Click to expand...
 
shrinkboy said:
the amp shipped safely and fully WOPL'd by Jerry, and it is probably the best upgrade i've ever done in my system. many, MANY thanks to Jerry for his fine work
Click to expand...


But................WILL IT ROCK THE HOUSE?
 
Hey SB - Wipe that smile off your face!!!

Enjoy...I haven't stopped smiling since I got my WOPL.
 
No kidding. I just got a box & a tube full of parts from Joe & I'm smiling!:laughing6:
 
You must log in or register to reply here.
Back
Top