Jimmy's 400 Rev D in for Warranty

Best money I ever spent on audio was on thisbugger right here..
 

Attachments

  • 20200312_183956.jpg
    20200312_183956.jpg
    2.3 MB · Views: 28
Quasi bass is "boomier"....nice to hear a quasi...it's been awhile...
 
Joe, I don't have the documentation for the Pl18 Rev B light board. Last 400 board i put in all I had to do is move the jumper, didn't have to add resistors.....
 
Well, couldn't get a THD & N test. The AP failed the THD & N self test and definately got some erroneous readings. was getting .0000% THD & N below 2khz...
 
laatsch55 said:
Well, couldn't get a THD & N test. The AP failed the THD & N self test and definately got some erroneous readings. was getting .0000% THD & N below 2khz...
Click to expand...

Well that is either a real bummer Lee or the best amp ever built...hoping it is something simple with your AP.
 
I'm sure they can fix it Joe. Residual was 432uv unweighted..pretty quiet..
 
laatsch55 said:
Well, couldn't get a THD & N test. The AP failed the THD & N self test and definately got some erroneous readings. was getting .0000% THD & N below 2khz...
Click to expand...
Lee try a memory reset. If you need the info I can send tomorrow. That fixed it for me
 
Jimmy's amp is going out in the morning. Had one last listen and bias set. A good little amp Jimmy....

New light board, new outputs and new Rev E driver board....
Oh.....and no charge....lifetime warranty...

Jimmy did split the shipping as per my warranty agreement...
 
You're welcome Jimmy, sorry it took so long. I feel like the light boards problem has finally been whipped. The tape that was on the inside of the meters has been real hot and disfigured. If you feel so inclined you mihght do something about it. I hated to try it as the plastic looks awfully brittle. Illumination isn't that bad, the board is spaced right, just that damn tape is in the way of a couple LED's...
There are also a bunch of spare fuses in the box...
 
You must log in or register to reply here.
Back
Top