Handbags at noon

Miracle Mile

Veteran and General Yakker
Joined
May 29, 2013
Messages
3,069
#6
LOL
All I did was repost a video on head-cleaning technique and referred to the origin as 'former banned TH member Andrej'.

View attachment 84016

'editorial bullshit' LOOL
Someone really has it in for me over there. I wonder who?

View attachment 84017
Chris,

Don't bother about it all..

The side owner is an narcissistic idiot without any self reflection.

....
 
Joined
Jun 13, 2024
Messages
441
Location
Peoples Republic of Vleuten
#11
....and predictably, that thread did actually turn into a handbag-swinging session.
There's really more to life.
If I needed a definitive reason to stop logging in over there then it's this.

As well as all the bitching over inconsequential minor details I noticed the general quality of the threads and advice has subsided a lot too. I think there's only tapetech and nakdoc who are left holding the fort in that respect. And Nando of course!
The rest is just pure garbage, sniping and nonsense. There are certain members who obviously make it a daily task to stay at the top of the 'new posts' leader board by posting the most mundane thread topics. Member Canhead seems to have perfected this into an artform.

dfd070e0b5487006db1674cee63227ff.png
 

vince666

Chief Journeyman
Joined
May 15, 2013
Messages
1,078
Location
deep south of Italy
Tagline
I will not be missed! :p
#13
Wha?! Bad words aren't allowed over there, two weeks in TH jail for the naughty mod!
Didn't you know the "rules" there are true only for the common members?
The Mod staff is well above any rules.... like if giving the good example to the people would be a terrible mistake! :p

"Do what we say and not what we do" is their motto.
 

vince666

Chief Journeyman
Joined
May 15, 2013
Messages
1,078
Location
deep south of Italy
Tagline
I will not be missed! :p
#14
As well as all the bitching over inconsequential minor details I noticed the general quality of the threads and advice has subsided a lot too. I think there's only tapetech and nakdoc who are left holding the fort in that respect. And Nando of course!
The rest is just pure garbage, sniping and nonsense. There are certain members who obviously make it a daily task to stay at the top of the 'new posts' leader board by posting the most mundane thread topics. Member Canhead seems to have perfected this into an artform.
I do remember the quality of the advices there went quickly down from when a "certain member" started to spam about polishing paste, Lenor fabric softener on rubber parts and some other bullshits, like (mis)aligning the left roller's guide on dual capstan deck according to how a track alignment test tape (of unknown reliability) reads OK on the PB head... (the guy ignores that if the tape doesn't run precisely in the path, checked with M300 gauge, sooner or later the fork guides on the head would be damaged on one side or the other by the border of the tape, developing a wear groove, unless it's so misaligned that the head damages the border of the tape... and that a tape physically runs in the proper path isn't necessarily related to how a test tape does read, because there might be other problems or tolerances getting unnoticed).
Ah, forgot about his practice of using nail files on pinch rollers! :oops::laughing5:
I had tried to debate with such member to make people see how his advices were pure crap but, hey, people do prefer the cheapest way to make things, even if it's the wrong way, so such "advices" became like the holy bible of deck repairs.
 
Top