Got The Perry 700 II Opened Up

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,124
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#22
Powered up, relay clicks, offset .000, and .000, Bias .381 left channel, .075 right channel and will only adjust from .064 to .075....
 

mlucitt

Veteran and General Yakker
Joined
Jun 24, 2011
Messages
3,339
Location
Jacksonville, FL
#28
It is a good feeling when you bring a WOPL back to life. We should document these failures in a dedicated thread, they don't happen very often. I wonder what the conditions were when the rail fuse detonated?
I had a customer that took out a few outputs of his PL700 II when he accidently dropped the tone arm onto a record. Took out his speakers too.
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,124
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#32
Yeah, just a little to far to the right.

Joe's engineering has made taking out an output a lot less painful. Not near as much collateral damage..
 
Top