Fishoz's PL 400 Conversion

[laatsch55]

We have a DC protect relay click and a good steady bias......install the rest of the outputs and back on the AP.

 

[Fishoz]

Fingers crossed!

 

[laatsch55]

I think it'll be fine now Fish...

 

[Fishoz]

Never had a doubt Lee. I wouldn't even know where to start looking for a problem like that or have the patience or ability to find it. All I'm good for is popping a cover, cleaning the shit out, check for bulging caps and de-oxit everything.

 

[laatsch55]

All ouputs in, powers up fine, bias at .375 and holding steady, offset .001 and .000....the AP is warming up...

 

[laatsch55]

Frequency Response....


Residual noise....325 Microvolts--UNWEIGHTED....

 

[laatsch55]

Thd & N , left channel...UNWEIGHTED....

 

[laatsch55]

THD & N Right Channel....

 

[laatsch55]

Max out was 258 wpc into 8 ohms, both loaded and driven at 1% distortion...

 

[Fishoz]

Sweet!!!

Give her a good run.

 

[laatsch55]

Signal to noise is KILLER!!! 102 db unweighted, 113 weighted...

 

[laatsch55]

Phaselag/lead then it goes on the horns for a SERIOUS shakedown...for a couple three days...

 

[laatsch55]

Phase lag/ lead Left channel

 

[laatsch55]

And it's back on the horns....IMHO....the top end on the Rev E boards is sweeter....

 

[Gepetto]

And it's back on the horns....IMHO....the top end on the Rev E boards is sweeter....

It looks sweet Lee...

 

[Fishoz]

Did you have her on the horns tonite?

 

[laatsch55]

Absolutely...

 

[Northwinds]

Another WOPL is born!!!!!!!!

 

[laatsch55]

Yweblwrs..

 

[Fishoz]

Did you blow her up yet???

The only thing I don't want to hear is that you're keeping her.