Derek92994's 700 Ser II White Oak conversion

[laatsch55]

I thought you said it was the row closest to the DCP?

 

[laatsch55]

Yeah,....

 

[derek92994]

Row I have replaced

 

[derek92994]

outputs 1 and 4 have the later date codes, solder time.

 

[laatsch55]

The ones you bought...yeah the 2011's are the ones I put in..,

 

[derek92994]

Outputs soldered in, will vacuum, prepare variac and dbt

 

[laatsch55]

Clean the flux Darc!!

 

[derek92994]

Clean the flux Darc!!

Ok will demount control board and do that, you are teaching me good habits

 

[laatsch55]

Amen bud!!

 

[derek92994]

Flux cleaned, good?

 

[laatsch55]

Looks like a cold solder joint on 18 and 14..

 

[laatsch55]

Bottom 1 on 20 too..

 

[derek92994]

Ok will re solder

 

[laatsch55]

 

[derek92994]

I had OCD, trouble getting joints right, almost there

 

[laatsch55]

Take your time...

 

[derek92994]

Ok resoldered
Cant get X14 any better, tried 4 times, has nasty solder which didnt like melting.

 

[derek92994]

I also heard a fizzle sound but no smell, hope I didnt blow anything with the heat

 

[laatsch55]

Clean em up and try it Darc!!

 

[derek92994]

Ok relays clicked in at 180 and 190 volts. Went to 230v, checking DC offset