Audio Precision ATS Discussions

Correction...input loading has an effect, or rather the compensation selected for either Hiz or Loz has an effect..
 
laatsch55 said:
So a square wave generated by the AP is confusing....as to it's value...coolness. I need more uncertainty running this thing!!
Click to expand...

I know the feeling. After 6mos of using it I'm really just beginning to scratch the surface on understanding the Sys1. Mines a standard 22A so no dual domain and I have most options but no burst module so no internal squarewave capability in mine.
 
I've had mine for 4 years and getting to where I can run a battery of tests without the book finally...
 
Probably wouldn't hurt to independently measure what the gen is actually putting out... and in that way you sort out what's what - an output problem or a detection problem... or worse yet, both. :laughing8:
 
I've never fed a square wave into mine so you had me wondering. I set up a 2 Vpp 1kHz square wave on my scope from the func gen and then fed it via unbalanced BNC to the AP. It measured as expected,,, 2V.

Squarewave.jpgSquarewave.jpg
 
Yeah, I'm not surprised by that. By the time the 'Sys' platforms came into being, with the APWin and all, I'd imagine AP got their s h ! t together.

But what I was driving at is what the ATS based gens actually put out vs. the panel control settings...
 
Last edited:
I've got an old Eico 377 sig gen, I'll try that tomorrow...
 
25.00 Ebay deal 8 years ago

The AP doesnt make a very square square wave, or I cant run my scope ..
 

Attachments

  • 20190509_202848.jpg
    20190509_202848.jpg
    1.8 MB · Views: 12
I just realized I have no idea how to output the scope...
 
I have an old 950 cap checker too with the tube for an Indicator light..
 

Attachments

  • 20190509_203346.jpg
    20190509_203346.jpg
    1.7 MB · Views: 5
At least you got one with a USB port on the front ... and not one with a floppy disc drive.
 
You must log in or register to reply here.
Back
Top