A Good Day For A Scotch And A Coke
- Thread starter Des_Lab
- Start date
- Joined
- Jul 26, 2011
- Messages
- 843
- Location
- Absurdy, new name of France
- Tagline
- You never have too much tapedecks ^^
- Joined
- Oct 23, 2010
- Messages
- 13
The past two weeks haven't been good ones for my older back coated tapes. Virtually every reel I treated with the NuFinish system (the one I refined from the original) has gone sticky again. Now it's been 2 years since I treated most so a touch up is not unreasonable to expect. However it's a PIA if you want to just run a tape. Fortunately I don't have many old sticky tapes and swore off acquiring any more.
That said I did run a retreated mix tape I made on Scotch 996 and 996 was one heck of an impressive tape. I rate it up with ATR which has been my go to still in production tape.
That said I did run a retreated mix tape I made on Scotch 996 and 996 was one heck of an impressive tape. I rate it up with ATR which has been my go to still in production tape.
- Joined
- Oct 23, 2010
- Messages
- 13
Essentially all of my early and middle period Ampex 400 series and the 356 and 357 Grand Master. Scotch 996 was hinting at being grabby but the 806 was full blown SSS. The 356 and 357 were the worst although they're no older than most of the 400 I have. The late Ampex and Quantegy is rock solid. I think SSS treatment with NuFinish is good for about 18 months before hitting it again. No big deal only takes a few minutes as it's just the extract part. However at the prices the known SSS offenders sell for now it's not worth the hassle. That's why I'm supporting new tape.
Yeah I would not recommend going after the known SSS tapes, even if you can bake and/or NuFinish them. It just isn't worth it. Not unless you can get them at a good price just to harvest the boxes and reels. How's that Q-457 I sent you to try holding up? I've always (and still do) swear by that stuff.