- Joined
 - Jan 14, 2011
 
- Messages
 - 75,509
 
- Location
 - Gillette, Wyo.
 
- Tagline
 - Halfbiass...Electron Herder and Backass Woof
 
 And remember residual noise and distortion are two separate beasts, one can affect the other yes, but anything under .25%THD & N is inaudible anyway (debateable). The WOPL's are damn close to that spec in the 20-20,000 range. Sometimes beating that figure, and where it exceeds it is at the high frequencies, look at the table for the distotion spec, at 20 k it's good , at 1k its good , below 1k it's excellent. It's all frequency dependent, as most things in audio.