2 turntables, one brain cell...

WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
Joined
Aug 10, 2015
Messages
11,856
Location
Minnie-Soda
Tagline
Screw it
Hey guys, I'm running an RL-11 with no turntable pre's in it and I have 2 Turntables which I am getting tired of switching the cable back and forth on the Pyle Phono Pre... I need a solution, no crazy engineering, noise/hum etc... ANy Idears???
 
WOPL Sniffer said:
Hey guys, I'm running an RL-11 with no turntable pre's in it and I have 2 Turntables which I am getting tired of switching the cable back and forth on the Pyle Phono Pre... I need a solution, no crazy engineering, noise/hum etc... ANy Idears???
Click to expand...

Assume both are MM input correct?
 
RL-11 What?


Maybe I need one & Google was no help. I want what you smart folks have!
 
WOPL Sniffer said:
Cambridge what???
Click to expand...

I think he's referring to his Azur 651P. It has two phono in's, one out. Plugs into any line level input. The only thing is one input is for moving coil and the other is MM. I'm not sure if you can plug a MM into a MC input. It's selectable on the back as to which input you want. Has a little slider switch.
 
I have a Gemini DJ mixer for Pete's sake...my Radio Shack SSM-60 died a long time ago. I doubt it will handle your Kenner Close N' Play, that is in rarefied air.
 
orange said:
I have a Gemini DJ mixer for Pete's sake...my Radio Shack SSM-60 died a long time ago. I doubt it will handle your Kenner Close N' Play, that is in rarefied air.
Click to expand...

NO to the mixer....... next thing you know, I'll be scratchin......


Cat.jpg
 
My scratching would not be a topic here...I use it to crossfade, handles two other sources.
 
Seeing $1600 and $50 shipping together still looks weird to me. I wouldn't spend the cost of a Blondie concert ticket (general admission/grass area), but then again, I don't have to, I don't have $1600.
 
bill7621 said:
I think he's referring to his Azur 651P. It has two phono in's, one out. Plugs into any line level input. The only thing is one input is for moving coil and the other is MM. I'm not sure if you can plug a MM into a MC input. It's selectable on the back as to which input you want. Has a little slider switch.
Click to expand...

I will only handle 1MM input and 1MC and allow you to switch between. So if Perry wants to change one table to MC, it will work.
 
Gepetto said:
I will only handle 1MM input and 1MC and allow you to switch between. So if Perry wants to change one table to MC, it will work.
Click to expand...

Get 2 of the phono pre's that you have now Perry and used one of the unused inputs on your RL-11
 
You must log in or register to reply here.
Back
Top