Search results

Hey Mark downloaded the SM, no actual parts list all parts are called out on schematics, but some of they have wrong values on them like R37, R38 say they are 47 ohm when they should be .47 ohm that is what is on my board, and been verified on the Carver site . Thank you for your help.

Does anyone have a parts list for this unit? Thanks for any help.

Thank you Vintage 700b, and Gepetto, believe I have found the part to use for replacement on the Molex site.

Can you tell me where I can find some, and what do you mean by pitch, are you talking about the pin dia. Thanks

I acquired a C 4000 that had the cord cut, I opened it up to see how hard it would be to replace and found the correlator board lose, went to reinstall and one of the board to board connectors fell off, so I am looking for replaces or a suggestion for a repair.The one that is needed is the 5pin...

Looking for someone who might have a antenna input terminal that they would part with, I am willing to pay for it. Thanks

Happy Birthday Lee

Well I have say Thanks to everyone who gave me input on this unit, it is back up and singing on both phono channels, it was a IC that had gone bad. Again Thanks.

Thanks Jim, did just that and already have one on the way.

There is a relay on the FEQ-614 board, I am looking for a replacement part number, the original part is a Matsushita DS2V-S-DC12V AG2333. Thanks for any and all Help in advance.

I would love to but it is against the law to do it the way I would like.

Found the problems and fixed. Now signing away. Thanks

Did some voltage testing and found right channel is showing 90.3v (should be 88.5v) and left channel has 2.4v, and this is coming from MI-801 the main input board, I have the correct voltage (15.5v) coming in from power section on main board for both channels, but confused as to what could be...

Well I did recap on unit and replaced some more transistors other than the ones in the service bulletin. Relays now kick in 3 seconds but still can't set left idle current, stuck at 0.0mV but unit plays with a small amount of static on left channel. Anyone with any ideas about left channel idle...

The green LEDs on your PS board in the PS1 photo look cool where did you get those and if by chance have a part number could I get it also.

Have done service bulletin and got it running, but in doing some testing found two caps that were bad C307-308, but can't get left channel idle current to come off 0.0mV. Relays take between 8 to 10 seconds to click in and at about 1/4 volume they click out. Any suggestions would be great, and...

Now that I can get sound out of the left channel when the sonic hologram button is pushed, I can hear static in the channel. Could I possibly have a transistor going bad in the phono section on the left channel?

Oh, forgot to mention the balance is off between left and right channels.

Ok guys I have the left phono channel but only with the sonic hologram in the on position. Now where do I go or is set up that way? Again Thanks for all help.

George can you go into detail on inputting a signal and how to test. I am a hobbyist at this stuff and I am good at following instructions but not sure on signal and testing and don't want to create more problems. Thank you for your help.