Search results

no it dose not it uses the 152wr it uses the rew15 part # it is a flatattach type not an angle attach this is the foam kit I have https://www.simplyspeakers.com/cerwin-vega-speaker-foam-edge-repair-kit-fsk-15fr.html these are the replacement dust caps I ordered...

it is a set of CVs re-38s 15''

I am getting ready to have a pair of woofers refoamed the dust caps are smashed. I have all the parts I know that you do not all ways have to remove the dust cap to do the job. my question is dose it matter what order you do the job in. change the dust caps first or the other way around

here is the comment that was left to to the guy that was complaining about his amp i have the crown xls 1000, i first used rca inputs from a computer i had the same issue as you it lacked power but its not ment for consumer grade voltage so i bought a Rolls MB15b ProMatch Balanced/Unbalanced...

this if from the manual Internal Controls: A three-position switch selects 0.775V,1.4V, or 26 dB voltage gain input sensitivity (all unitsmanufactured with D 7911-7 main module or later;earlier models only allowed for 0.775V or 26 dB ga

from what I read if it is the 2 setting one I have to use .775 or 26db. I have not seen the amp yet. it is at a friends house hope mine is the one with 3 setting for the input selector cause I would like to use the 1.4 setting. my preamp has a 1V output. I think that would be a good match and...

you are right but I have one with both 1/4'' and xlr inputs. I think some had both and some only had the 1/4''. here is the link as you can see it has xlr inputs...

here are some specs. Power8 Ohm Stereo—320W/Ch4 Ohm Stereo—400W/Ch8 Ohm Bridge Mono—965W4 Ohm Parallel Mono—680W2 Ohm Parallel Mono—955W Frequency Response: ±0.1dB from 20 Hz to 20 kHz at 1Watt. Phase Response: ±10° from 10 Hz to 20 kHz at 1 Watt.Signal to Noise Ratio: Better than 105 dB...

I just got a new to me crown 800 csl and I would like to know how to set it up? Should I use f-rca to m-1/4'' adapters or a rca to xlr converter box thanks

not know but in the future if you ever have these "bargain basement"/deal prices again please tell me that is like giving it away

thats cool and looks factory. what did you have to do to make the meter switch work

that is what I am doing. at the rate I am going I should have a replacement it 4 and half year from now. for now I will keep looking at my empty cerwin vega pd18b cabinets wishing they were being driven by a freshly build 700b or series ii. I know that overkill but am one of those people that...

this was the amp you sent me I need cash to fly from el paso to PA and back for a family problem. I had some money saved but not enough so I gave it to some one that I thought was a good friend but was really a piece of shit and he stabbed me in the back. my familly gave me money to get my amp...

glad that you got a 700 to wopl. I hope you do videos for the build like you did with your 400.

the first mids I used were pyle pdmr5 92db 100 watts rms 200 peak lasted 3 years give or take then they blew. put stock back in and lasted 6 months. I do not think the crossovers were to blame more like my amp did cause wopls are the best.

the horns are pyramid tw36 150 peak watts but claim 400. 93db say 4ohms but read 6.3 75 watts rms

thanks I would love to take credit for it but it is not mine. found it online. one day I will have along with a v8 s10 blazer on 1ons.

parts list pyle pl1590bl pyle pdmr9 morel cat 387 emb cx31 acrytech acoustx

I just listed what I did and still need to be done I do not mean to scramble any one brain

I am no salvation army or good will or insert name here ____________. just want to pay it forward and maybe help some one who is just getting started