Search results

Say Wht? Miracle Mile, Can you run that by me one more time. From you post it is and it isn't at the same time. I am confused. Ric:glasses2:

I have a TEAC A-150 cassette deck with Dolby NR. No B or C just Dolby like on my JVC V-621 just Dolby NR. I the TAEC Dolby compatable with ether B or C Dolby on my other decks? Ric:glasses2:

Tennessee Connection Nakdoc, Thanks for that info. Learning the complexities of ohms load over the frequency spectrum is about half a dozen notches above my pay grade. Fascinating really. I see we are neighbors. I am in Brentwood. Do you have any tech services you recommend around here...

Cool Man, Thanks:glasses2:

Ohms Factor Talking to a local HiFi guy about the Advent (LG) Ohms factor. He explained that they were actually rated @ close to 6 ohms and with two pair running together the load on one amp would be close to 3 ohms. Is it through some creative wiring that 8 advents could maintain a 8 ohms...

Someone explain please Can someone clarify the 4 terms below for me and what they are selling with these specs? thanks Ric:glasses2: Clipping Headroom: + 1.6 dB Clipping Power(Maximum Power) 130 Watts at 8 ohms Dynamic Headroom at 8 ohms - + 2.5 dB Dynamic Power( short term) 160 Watts at 8 ohms

A couple of weeks back I made my cursory cruse through the electronic display at the local thrift shop. Not much as usual then over by the TV's I spot something real big with lots of knobs, buttons, switches and dials. It was a NAD 7080, flagship of the mid seventy's NAD receivers. I've read...

I give up Well I turned the 707 over to the local Hi Fi Tech. They are pretty good and I am hopeful that they can get her going. He seemed optimistic. Never could get the thing to transport constantly. Should know something in a couple of weeks. Ric:glasses2:

No, I believe that is what is called a knob polisher. Completely differant, but useful. Ric:glasses2:

So it won't hurt to put a little pressure on the heads polishing them. I didn't know how much they could take. R:glasses2:

good to all Thanks for all the bits of info. After my last post I thought I would take another shot at the face of the worst of the heads. I have some oxidation remover, brand name Ultra Luster. It is a polish that will pull out oxidation with out a lot of hard rubbing. Turns out most all the...

Yep That is what I was thinking. sounds Expensive $$$$$$$$$ R:glasses2:

Agree I would have to agree with that. Also there is a bar under there with the heads that looks like it is worn and rusty and certainly needs replaced R

Cleaning Fishoz, I did spend some time wit swabs 90% alcohol. Still seeing some real gunk in the crevises of the guides but I think I have the majority off the heads. Do pitted heads need replacing then? ric:glasses2:

DECK ARRiVED 7:30 last night that the postwomam showed up with the 707. She is pretty damn strong to get up the stairs to the porch and still be smiling when I opened the door. It seems to work, in that it records and plays back and sounds good to me. I have attached some (not to good) photos...

USPS 2nd Day Run a muck Deck sent on the 19th, 2nd Day US Mail. It took 48hr to get across Arkansas to Memphis where it has languished sense noon on Friday. What he pissing hell. Sorry relief valve cut out there. Guess it will get here before thanks givin' ya suppose? Ric:confused1:

Done Deal on the 707 Well the deal has been struck and my R2R should arrive Friday. Now I am wondering what type of tape I should be looking for. I will be recording off of LPs, Cds and the FM Jazz brodcasts. Ric:glasses2:

Smartass better than No Ass Very helpful now! I can record worry free! R

I'm wondering how long a recording I will be able to make on my new 7" Rt 707 @ 7.5 and 3.75 speeds? And where are some sourse for blank or used tape? Ric:glasses2:

winning bid on Rt 707 I won an EB auction for a RT 707. I should get it this week. Fingers crossed that it is as discribed. Sell has good history @ 100% so maybe I will get lucky. Ric:glasses2: