- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
Bobby's Dad's thread....
- Thread starter pennysdad
- Start date
- Status
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
.... and now I'm back.
I'm too excited and exhausted to do any more than just stare at everything 'till I go to bed.
Lee, don't you run away too far, as I'll have a gozillion questions in the next 24 hours. LoL.
1st one off the top of my head, is how the hell do I convert these to stereo?
I'll take some pics tomorrow to show you wot's goin' on, but I think it's a lot simpler than I think it is. (if that makes sense.)
Theres a module on the back panel, which I think is the bridging circuit which clearly has two signal input leads tied into it. I just need to figure out what the other wires do. All wiring is via a connector to the module, which occupies about 2/3 of the back panel and is interchangeable with other modules.
Anyway, 'nuff said for now. Time to take that little yellow pill that I didn't take last night......
I'm too excited and exhausted to do any more than just stare at everything 'till I go to bed.
Lee, don't you run away too far, as I'll have a gozillion questions in the next 24 hours. LoL.
1st one off the top of my head, is how the hell do I convert these to stereo?
I'll take some pics tomorrow to show you wot's goin' on, but I think it's a lot simpler than I think it is. (if that makes sense.)
Theres a module on the back panel, which I think is the bridging circuit which clearly has two signal input leads tied into it. I just need to figure out what the other wires do. All wiring is via a connector to the module, which occupies about 2/3 of the back panel and is interchangeable with other modules.
Anyway, 'nuff said for now. Time to take that little yellow pill that I didn't take last night......
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
I'm looking at this, Lee.
Do you think it'll do the job?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=380586918073
Do you think it'll do the job?
http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=380586918073
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
this has absolutely destroyed me no end......
wot's worse, is I feel so responsible for my mate blowing his $$$'s on buying the other four amps of which only one of his is a 7B (800x) and the other three (Sonics 600x) are still unknown as to what THEY are.
they did all look identical to these physically but only had 1/2 of the o/p transistors per side.
I did want to test them all before we did the deal, but HE was in a hurry just to pick up and go.
damn damn damn.....
still, it's my fault, and I will suffer.....
wot's worse, is I feel so responsible for my mate blowing his $$$'s on buying the other four amps of which only one of his is a 7B (800x) and the other three (Sonics 600x) are still unknown as to what THEY are.
they did all look identical to these physically but only had 1/2 of the o/p transistors per side.
I did want to test them all before we did the deal, but HE was in a hurry just to pick up and go.
damn damn damn.....
still, it's my fault, and I will suffer.....
Last edited:
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
I have emailed Mike at Bryston, and am waiting for a reply.
We have already chatted previously about these things, so I'm hoping for a speedy response.
I've checked the schematics for the 7B, and it looks like the 240v xformers have a different part number, plus there seems to be an additional bridge rectifier added. (????)
u can't series amps!!!!!!
looks like a s/t xformer is the go. i'll have to wait a bit before i can afford it tho'. i'm now officially poorer than my cats
We have already chatted previously about these things, so I'm hoping for a speedy response.
I've checked the schematics for the 7B, and it looks like the 240v xformers have a different part number, plus there seems to be an additional bridge rectifier added. (????)
u can't series amps!!!!!!
looks like a s/t xformer is the go. i'll have to wait a bit before i can afford it tho'. i'm now officially poorer than my cats
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
- Joined
- Jan 14, 2011
- Messages
- 74,972
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
- Joined
- Feb 27, 2013
- Messages
- 3,728
- Location
- In witness protection.
- Tagline
- I've totally lost the plot....
- Status