Parts Database

[Gepetto]

I just happen to have a few! Thanks!
The .47 μf value is what I read from the original service manual.

Yup anything over that original value is fine Mark. Polar caps suck as coupling caps which is this application.

 

[MarkWComer]

Two items that I'll have to let you know if they're suitable for the WO chassis:

1-15R "fan only" AC outlet: 562-738W-CX2-01
DPDT "direct couple | normal" slide switch: 611-S202091SS03Q
Coupler caps for above (63v 1µf): 505-MKS21.0/63/5

All Mouser PNs.
(I may have to edit this later if something doesn't work...)

Oops- the switch in the chassis I have is DPDT, but a DPST would work- two legs aren’t used. I’ll find something else...

DPST switch: 629-GF325

 

[MarkWComer]

Manufacturer Part Number: SP400-0.009-00-04

DigiKey has these in stock:

http://www.digikey.com/product-detail/en/bergquist/SP400-0.009-00-04/BER211-ND/529928

Ordered SilPads from Mouser in April, still back ordered.

Response from inquiry:
I have heard back from the Manufacturer and they could not provide a in-stock date at this time. Mouser is continuously in contact to make sure we can get a confirmed dock date.

Just FYI...

 

[Gepetto]

I always have ~1000 in stock Mark.

 

[MarkWComer]

I always have ~1000 in stock Mark.

I hate bugging you... I hate bugging anyone! And I won’t until I run out of options...
But, yeah, I was gonna post a “can I borrow a cup of sugar” message and return them when my order came in.
I still have the IC that someone sent for the PL400 DC circuit, and a handful of germanium xsistors for the now obsolete version of the driver board. When the 400 had the blowout I bought double the parts required to fix it, so I’m a parts hoarder.

 

[Gepetto]

I hate bugging you... I hate bugging anyone! And I won’t until I run out of options...
But, yeah, I was gonna post a “can I borrow a cup of sugar” message and return them when my order came in.
I still have the IC that someone sent for the PL400 DC circuit, and a handful of germanium xsistors for the now obsolete version of the driver board. When the 400 had the blowout I bought double the parts required to fix it, so I’m a parts hoarder.

Shipped, you should receive in a few days time.

 

[MarkWComer]

Shipped, you should receive in a few days time.

Spoot...
Already ordered from Digikey. Looks like I’ll have 1,000 myself...
I left the Mouser order open, BTW.

 

[MarkWComer]

1-15R "fan only" AC outlet: 562-738W-CX2-01

The new WO chassis has thicker metal and the ears that lock this part in will need a little modification. This appears to be the ONLY chassis mount AC connector of this type on the planet.

 

[Gepetto]

The new WO chassis has thicker metal and the ears that lock this part in will need a little modification. This appears to be the ONLY chassis mount AC connector of this type on the planet.

Figured that based on the spec sheet. It is the only one I located Mark after searching for options.

 

[MarkWComer]

Figured that based on the spec sheet. It is the only one I located Mark after searching for options.

Other planets, then...

 

[Gepetto]

Other planets, then...

Somewhere out in the galaxy. Your S2 ditched the outlet that the 700Bs had.

 

[Gepetto]

You might try this one Mark. Looks possibly easier to modify for chassis thickness.

https://www.ebay.com/itm/MPJ-32040P...30AAOSwImRYLkHk:sc:USPSFirstClass!01564!US!-1

 

[Gepetto]

Or these

https://www.ebay.com/itm/3-pack-Whi...881117?hash=item4d6e78a11d:g:D1wAAOSwDmBdEoBk

 

[MarkWComer]

Somewhere out in the galaxy. Your S2 ditched the outlet that the 700Bs had.

Or these

https://www.ebay.com/itm/3-pack-Whi...881117?hash=item4d6e78a11d:g:D1wAAOSwDmBdEoBk

Good ol’ Dremel tool! I’ll have a fresh brain in the morning. Odds are that I won’t actually plug something into it, but it’s an original feature that I want to keep. Caveat to the next Phaser fan.

 

[MarkWComer]

Heyco strain relief plug SR 14-4
Mouser 836-1120

(Used in most stereo components)

 

[MarkWComer]

Alps power switch for 700/II
Not the correct part number, looks like it should work
A bit pricey...

https://www.ebay.com/itm/Alps-SDU3P...rentrq:8558491116c0aa492f0e092fffcf3a91|iid:1

 

[WOPL Sniffer]

Alps power switch for 700/II
Not the correct part number, looks like it should work
A bit pricey...

https://www.ebay.com/itm/Alps-SDU3P-Power-Switch-TV-3-NAD-Realistic-Marantz-Concept-16-5-Sanyo-Receiver/283546329093?_trkparms=aid=111001&algo=REC.SEED&ao=1&asc=20160908131621&meid=b061a01618334c57a3273303184d92eb&pid=100678&rk=1&rkt=15&sd=283546329093&itm=283546329093&pg=2481888&_trksid=p2481888.c100678.m3607&_trkparms=pageci:dc30b793-bcea-11e9-966b-74dbd180e20c|parentrq:8558491116c0aa492f0e092fffcf3a91|iid:1

They work well. Just need to jumper across to use both internal switches so the load is spread across them both. That and a snubber cap and the'll last for decades. I use them all the time and yep, pricey for sure. Lee showed me that trick...

 

[laatsch55]

From which Ed showed me..

 

[NavLinear]

I'm plan to get a lot of 10 of these:

https://www.ebay.com/itm/382516589955?ul_noapp=true

They'll be about $15 shipped. If anyone is interested let me know. I have not pulled the trigger yet, but I'd like two or three for myself.

 

[Wheel-right]

I'm plan to get a lot of 10 of these:

https://www.ebay.com/itm/382516589955?ul_noapp=true

They'll be about $15 shipped. If anyone is interested let me know. I have not pulled the trigger yet, but I'd like two or three for myself.

I'd be interested in two of these if you decide to go ahead. Got a 700 II now and a friend with a 16.5 Concept so probably a good idea to have a couple around. Rob