FOR SALE Phase Linear 700 Series II - 2 New WOPL BUILDS

WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#24
Joined
Aug 10, 2015
Messages
11,833
Location
Minnie-Soda
Tagline
Screw it
#24
laatsch55 said:
Coolness....
Click to expand...
Well Lee, I got some test time in on the Prism dScope and I printed some of the results out but as soon as I started going through the test results, I have a bit of work to do. The amps are fine it's just some of my graphs are funky... I got my X axis on a couple of tests set up as Frequency where it should be in a unit of amplitude (for Gain vs Amplitude test) where Gain is the Y axis (in dBr) and the X axis is sitting in 10 -20Khz.

I have been taking some generic tests they used on this dScope at the Tron Shows for potential customers and customizing them for the WOPL's. Just gonna take some time.... I really like this tester, it takes like 3 minutes to sweep through the 11 tests I am using. I need to add a couple more like Power out but it will come soon.


You'll see what I mean below. I got freq's on both Axis... I'll get it yet...


THDnoise.jpg
 
laatsch55

laatsch55

Administrator,
Staff member
#25
Joined
Jan 14, 2011
Messages
75,331
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#25
It takes the AP at least 3 minutes to do a THD & N sweep. It is settable between 75 and 150 points, and 3 speeds, slow , medium and fast. I use the slow and 150 point test, cause in THD & N testing, slower is better....
 
WOPL Sniffer

WOPL Sniffer

Veteran and General Yakker
#27
Joined
Aug 10, 2015
Messages
11,833
Location
Minnie-Soda
Tagline
Screw it
#27
laatsch55 said:
Will it also print the numeric tables of the same graph?
Click to expand...
Yes, but I don't have Excel on this computer. I have a lot of work to do. I'll start posting the tests one at a Time and let you look at em. It also logs all the settings of the tester so you can help me get all the bugs out.
 
You must log in or register to reply here.
Top