Ben's (BubbaH's) Phase Linear 400 WOPL conversion

BubbaH

BubbaH

Veteran and General Yakker
#123
Joined
Mar 13, 2013
Messages
3,315
Tagline
---
#123
No problem here bud. Take your time man. Theres an old saying about rushing stuff, but I dont remember it. :wink:
 
frhodes

frhodes

Journeyman
#127
Joined
Feb 10, 2013
Messages
264
Location
Ouagadougou
Tagline
---
#127
80 volt caps?

laatsch55 said:
Ben's is next. ......It's getting the Rev "D" driver board, Rev "B" backplanes, LED light board, Don's DCP, 18,000uf/80volt Cornell-Dubilier PScaps, MJ21195's and 96 outputs.....pretty much everything we can do...
Click to expand...
Lee, I thought the WOPL's needed 100 volt caps?
 
laatsch55

laatsch55

Administrator,
Staff member
#128
Joined
Jan 14, 2011
Messages
74,774
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#128
They do, this one has Joe's 100 volt cap stacks... The only 80 volt I use are the old stock Ed sends me once in awhile. He had a stash of 80 volt CD's that I'm confident can stand the push, but he's about out. Remember I'm the guy that runs those 100volt/22,000uf's in my personal 700's.....
 
Gepetto

Gepetto

Administrator
Staff member
#130
Joined
May 15, 2011
Messages
13,915
Location
Sterling, MA
Tagline
Old 'Arn Enthusiast
#130
laatsch55 said:
They do, this one has Joe's 100 volt cap stacks... The only 80 volt I use are the old stock Ed sends me once in awhile. He had a stash of 80 volt CD's that I'm confident can stand the push, but he's about out. Remember I'm the guy that runs those 100volt/22,000uf's in my personal 700's.....
Click to expand...
Lee always lives on the edge...we know that :)
 
laatsch55

laatsch55

Administrator,
Staff member
#131
Joined
Jan 14, 2011
Messages
74,774
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#131
Plus, I doubt I'll even restore enough Spec 2's to burn up my stock of those 100volt/22k caps. I think I bought 30 of em...course a Spec 2 takes 4 of em...
 
laatsch55

laatsch55

Administrator,
Staff member
#135
Joined
Jan 14, 2011
Messages
74,774
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#135
Got a few hours today while 2 of our workover rigs are moving to different loactions so we are wiring up the backplanes..
 

Attachments

G

gadget73

Journeyman
#138
Joined
Aug 29, 2014
Messages
465
Tagline
---
#138
Whats the rail voltage on a 400, 75v? If so, an 80v cap ought to work, though it is a bit tight. The stock 700 rails were at or a couple volts over their caps too. I think mine runs like 103v and the caps are 100v rated.
 
You must log in or register to reply here.
Top