Johan's Phase Linear 700B Fully Comp Conversion

[laatsch55]

Threaded inserts in..

 

[laatsch55]

Duh.....

 

[laatsch55]

For Joe.....

 

[Gepetto]

For Joe.....

 

[laatsch55]

Crown XO and Blackcherry soda......good stuff

 

[laatsch55]

Backplanes done..

 

[laatsch55]

Johan's 700. Time to go to work...

 

[laatsch55]

Very clean unit... Board out...

 

[jbeckva]

Wow that is very clean inside.. Too bad it's ALL GOTTA GO!!

 

[Gepetto]

Wow that is very clean inside.. Too bad it's ALL GOTTA GO!!

You should see his other unit. Puts this one to shame...

 

[laatsch55]

Joe, got some pics of the last one you did for him so I can match some stuff?

 

[laatsch55]

Not a one of these plastic bosses were even slightly scuffed or broke...

 

[Gepetto]

Joe, got some pics of the last one you did for him so I can match some stuff?

I have a lot of pics that I can get to you Lee.

 

[laatsch55]

Just a couple of around the inputs so I can match what ya did with the normal/direct switch and how you routed the ac from the accessory switch..

 

[Gepetto]

Just a couple of around the inputs so I can match what ya did with the normal/direct switch and how you routed the ac from the accessory switch..

 

[laatsch55]

Perfect Joe. That's what I needed. 1uf caps?and 220K resistors?

 

[Gepetto]

Perfect Joe. That's what I needed. 1uf caps?and 220K resistors?

Correctamundo Lee.

 

[Gepetto]

Perfect Joe. That's what I needed. 1uf caps?and 220K resistors?

I use a short length of 5/8" dowel to form the radius bends in the wire...

 

[laatsch55]

LOL , okay Sir joe, got it from here.....I'm thinkin they should at least match at the inputs, and look relatively familiar..

 

[laatsch55]

Finally figured out what you did under the heatshrink. You co-joined the shields and lenghtened with the black wire...