The White Oak Audio Model 1 Cabbage Case Thread

laatsch55 said:
Nah....but they can be #1, and #2 of the limited EK edition...
Click to expand...
I have been thinking about how best to implement a “makers mark” and S/N tag for each amp I build.

Unfortunately, it can be very subjective on what’s appropriate.

Let’s discuss what might work for you.
 
Hexis22 said:
I have been thinking about how best to implement a “makers mark” and S/N tag for each amp I build.

Unfortunately, it can be very subjective on what’s appropriate.

Let’s discuss what might work for you.
Click to expand...
Hi Eric
You will be receiving a Christmas card with 2 tamper proof, matte silver White Oak Audio serial number tags in it. They will be SN 0005 and 0006 unless otherwise argued :-)
 
Gibsonian said:
I will be in the market for one down the road, just not the right time for me. A rev bump or two down the road and I'll be a calling.
Click to expand...
The Wire List was at Rev R last time I checked. There have been two early revisions. One was to the Power Control Board to allow larger AC power input wire gauge and the other was to the Meter Control Boards for better power regulation for the lighting circuit. These revisions did not affect the audio signal and were more aesthetic.

I would not expect to see any revisions to the Model ONE due to a continuous improvement process, small things may improve as time goes by but the engineering is solid.
 
Have also observed too little evidence of said builds and nearly zero discussion of performance either subjective or objective for my tastes…,,,,,,
 
mlucitt said:
The Wire List was at Rev R last time I checked. There have been two early revisions. One was to the Power Control Board to allow larger AC power input wire gauge and the other was to the Meter Control Boards for better power regulation for the lighting circuit. These revisions did not affect the audio signal and were more aesthetic.

I would not expect to see any revisions to the Model ONE due to a continuous improvement process, small things may improve as time goes by but the engineering is solid.
Click to expand...

Hi Mark
Wire list revision is currently at Rev V driven by suggestions you made during your first build back in mid April of 2024 (thank you for that). Many revisions were driven in mechanicals, PCBs and documentation prior to any release of the product. Mostly small moves to get things optimized and to make the design more robust and more straightforward to build.
 
Gibsonian said:
Have also observed too little evidence of said builds and nearly zero discussion of performance either subjective or objective for my tastes…,,,,,,
Click to expand...
Mark posted an entire thread Scott and Eric is in the process of posting his progress currently.

Mark is building his second, and Eric is building his first. There are only 5 in existence at this point. A slide show exists that provides a step by step.

White Oak Audio Model ONE Build Slideshow
 

Attachments

Gepetto said:
Hi Mark
Wire list revision is currently at Rev V driven by suggestions you made during your first build back in mid April of 2024 (thank you for that). Many revisions were driven in mechanicals, PCBs and documentation prior to any release of the product. Mostly small moves to get things optimized and to make the design more robust and more straightforward to build.
Click to expand...
Can you send me a copy of the Rev V Wire List. I like all the reasons you mentioned.
 
mlucitt said:
Can you send me a copy of the Rev V Wire List. I like all the reasons you mentioned.
Click to expand...
Hi Mark
You have V, sent the other day and today it moved to RevW for a wire color mistake on the listing. You also have that RevW now.

Joe
 
You must log in or register to reply here.
Back
Top