PL 400 Series One Fuse holder replacement

[Sunnbobb]

My 400 has three different fuse holders.. I searched the site and the net for information on a proper replacement part. I'd like the holders to match and be original if possible. Anybody have a suggestion? I appreciate it.

 

[WOPL Sniffer]

Replace them with 1 model so they match, and use AGC fuses instead of hard to find shorties.

https://www.ebay.com/itm/3334900099...qTqZ0jUmgiAghgR9BlJAlsWw==|tkp:Bk9SR6jzgviNYg

 

[Sunnbobb]

Thanks, exactly what I needed. You're a good man Charlie Brown.

 

[WOPL Sniffer]

Thanks, exactly what I needed. You're a good man Charlie Brown.

Don't tell anybody, I might get a bad name.

I buy those holders by the 100's since I replace every single one on every amp I have done and these are great hevy dooty stuuf.

 

[WOPL Sniffer]

I bought several hundred and am down to 4 holders left. I ran out of stash for all my parts so I retired.

 

[WOPL Sniffer]

I actually use the expensive Bussman HKP units, shop around if you want better prices but these are actually the cat's meow

https://www.ebay.com/itm/1934251745...YtixL80Mrdzjgj8goeP/Izqw==|tkp:Bk9SR7rBjvmNYg

 

[WOPL Sniffer]

you only need a few so get the good ones.

 

[WOPL Sniffer]

Way better prices

https://www.ebay.com/itm/2662546953...7LyBQtNYddLpYMR9TxsuKE/eM5VC|tkp:BFBM1OWn-Y1i

https://www.ebay.com/itm/2239581691...fq246QAG0nDHeSqIP3ls7jhEPY|tkp:Bk9SR9Tlp_mNYg

 

[Hexis22]

I just ordered a bunch from here:

https://www.futureelectronics.com/p...ction--fuse-holders/bk-hkp-hh-r-eaton-6364962

 

[Sunnbobb]

Nice find Hexis

 

[WOPL Sniffer]

I just ordered a bunch from here:

https://www.futureelectronics.com/p...ction--fuse-holders/bk-hkp-hh-r-eaton-6364962

Let me know if you actually get any from them. The ad looks kinda week.

 

[Hexis22]

Agree, I only ordered enough to complete my next 3 builds.

Received all parts within 3 days of order and they are genuine BK/HKP-HH-R parts.

 

[WOPL Sniffer]

Agree, I only ordered enough to complete my next 3 builds.

Received all parts within 3 days of order and they are genuine BK/HKP-HH-R parts.

I ordered a few for the amps I have in reserve for future builds. Can't beat the price

 

[Hexis22]

Although they appear to be parts made after production moved to Mexico, the tabs are different from older components I've had for over 10 years.

Left is new just received from Future Electronics, Right is old:

 

[WOPL Sniffer]

Looks like they chinee'd out a bit but still should be excellent replacements. The new style tabs are for either spade terminals or wire so no problem there. Looks like the 16ga wire should go in there easily. I have used these before.

 

[WOPL Sniffer]

Funny, I didn't realize that they have a store on the south side of the Twin Cities.

They also carry the solder style with tab's like your older ones.

 

[Hexis22]

The smaller hole would require modification for use in attaching multiple 16ga wires as used in 400 builds.

 

[George S.]

One appears to be solder tab and the other Faston.

 

[Sunnbobb]

I ordered the replacements, thanks gang. As A side note, I also sent emails to WO and WA for parts to get the rebuild underway. Looks like "robyn" put this one together originally..

 

[laatsch55]

Robyn's with a Y were always a good time in my life. .