- Joined
- Jan 14, 2011
- Messages
- 75,382
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Got it in one Jer!!
Jerry's "Gonna Rebuild me PLWO 1000" thread
- Thread starter jbeckva
- Start date
- Joined
- Jun 11, 2010
- Messages
- 6,883
- Location
- Powhatan, Virginia, United States
- Tagline
- WassupYa Mang?
The variac and DBT are CONNECTED UP and READY...
(I aint.. gotta go smoke .... )
(I aint.. gotta go smoke .... )
- Joined
- Jun 11, 2010
- Messages
- 6,883
- Location
- Powhatan, Virginia, United States
- Tagline
- WassupYa Mang?
Not looking good. Neither side can handle a load and the right channel oscillates in and out depending on how much I push it (which isn't much). There were some arcs n sparks during round "One" with the green sockets, so perhaps some of the outputs have become questionable.
I'm probably going to send 'er off to the "master" (Lee). As at the very least it would be easier for him to determine if the problem is in the chassis/output section or something zapped on the WO driver board.
Yeah.. going to pack er up this weekend, Lee. Like I said to ya, just let me know what got hosed up so I know next time (I aint "defeated".. I'm just licking some wounds at the moment.. heheh)
I'm probably going to send 'er off to the "master" (Lee). As at the very least it would be easier for him to determine if the problem is in the chassis/output section or something zapped on the WO driver board.
Yeah.. going to pack er up this weekend, Lee. Like I said to ya, just let me know what got hosed up so I know next time (I aint "defeated".. I'm just licking some wounds at the moment.. heheh)
- Joined
- Jan 14, 2011
- Messages
- 75,382
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
If an amp was sent to me by some guy that had guaranteed it for as long as he lived, I would not be embarrassed to send it back.