Schmurpy
Journeyman
Newbie question....
Wanting to connect two PL 700 II amps to a preamp, and want to know the best way to go about it?
Wanting to connect two PL 700 II amps to a preamp, and want to know the best way to go about it?
Best way to connect multiple amps to one preamp?
- Thread starter Schmurpy
- Start date
- Joined
- Jan 14, 2011
- Messages
- 75,398
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Y cable.
Schmurpy
Journeyman
Thanks
VSAT88
Veteran and General Yakker
Used something like these before. https://www.ebay.com/itm/Copper-Gol...349624.m46890.l49286&mkrid=706-127636-26712-0
Vynuladikt
Journeyman
- Joined
- May 4, 2016
- Messages
- 456
- Location
- Northeast Iowa
- Tagline
- Love great audio, beermaking and pyrotechnics
Or use a Carver C-1, it has dual outputs, some other preamps do as well. Of course a "Y" cable is just as effective.
VSAT88
Veteran and General Yakker
Yep
J!m
Veteran and General Yakker
If you have room you could blow a couple holes in the back and add some RCAs, for a dual output preamp...
VSAT88
Veteran and General Yakker
Or you can buy my Aragon 28k III. It comes with holes already blown in the back with an extra set of RCA outs from the factory and a remote.
It depends on what your end goal is. Here's another option.
https://www.behringer.com/product.html?modelCode=P0100
Good luck.