An Anti-WOPL...Anyone See This Photo Before?

[orange]

Behringer = permanently broken repair practice dummy

 

[VSAT88]

Dont talk like that they may take offence and start building better products !

 

[orange]

I think they take pride in shoddy craftsmanship. Nobody does it better.

 

[mlucitt]

I would like to have the bolts holding on the faceplate..

Do we have a source for PL faceplate bolts? You know, those aluminum things?

 

[VSAT88]

All the faceplate bolts I have found have letters/numbers stamped on them. Mine are all stainless steel...Still have not seen any locally that do not have stamped numbers/letters on them.

 

[Geegz]

All the faceplate bolts I have found have letters/numbers stamped on them. Mine are all stainless steel...Still have not seen any locally that do not have stamped numbers/letters on them.

https://www.ebay.com/itm/ALUMINUM-H...588770?hash=item1a722b47e2:g:5lkAAOSw5tNcRkMB

Aluminum and no writing on these

 

[VSAT88]

https://www.ebay.com/itm/ALUMINUM-H...588770?hash=item1a722b47e2:g:5lkAAOSw5tNcRkMB

Aluminum and no writing on these

Those would definitely work.

 

[Geegz]

https://www.ebay.com/itm/ALUMINUM-H...m=113722749642&_trksid=p2046732.c100040.m2060

These are 1-1/4” with nuts....same seller. I would be sure and ask about any writing on them if you purchase as these might be stock photos.

 

[mlucitt]

I'll try them (12), that's 3 amplifiers worth. I'll report back on how they look.
And if anyone wants 4 of them, let me know.

 

[VSAT88]

I'll try them (12), that's 3 amplifiers worth. I'll report back on how they look.
And if anyone wants 4 of them, let me know.

I have been meaning to ask down at Fastenal when I am down that way. I buy a good few screws, nuts, hurricane nuts and such for speaker rebuilds/upgrades there and the prices are damn good from what I have see. Perhaps I can get down that way soon and check out what they have. I am guessing that if one bought aluminum that even if they did have writing or numbers on they could file them off then polish them up..

 

[Bradrock]

Chuck the bolt in your hand drill & spin it against sandpaper.
Or use the stainless socket head cap screws with no markings.