Michael F
Journeyman
I would like to replace the original electrolytic cap C22, whose value is 2.2uF@35v. Should I stay with those values or would something else be appropriate for my Rev C equipped amp?
TIA
TIA
700B input coupling cap
- Thread starter Michael F
- Start date
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
The 1 uf that Joe has shown in his builds....polypro....
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Mouser Part number-----505-MKS21.0/63/5
Michael F
Journeyman
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Welcome Mike, check out my Johans 700 thread, makes for a neat installation....
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
That's a very long thread, here ya go Mike...
http://forums.phxaudiotape.com/show...hase-Linear-700B-Fully-Comp-Conversion/page10
http://forums.phxaudiotape.com/show...hase-Linear-700B-Fully-Comp-Conversion/page10
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
IIRC, Joe said this brings the cutoff point to 3HZ.....