The picture you posted had them missing
i know, you are right, but had found it before i powered up....i went back through the plastic bags looking for parts if/when i convert to full comp...
i have them documented and set aside ....there were also a few extra resistors, etc...i confiscated them too....lolol
and at that time i found those minor, irrelevant, insignificant, unimportant resistors....lolol
so i installed them before i started testing...
seemed to be two problems upon testing...
1. seems christines techs in the past did not pay attention to the colors of the bias extension cables as per the docs...
and i trusted they were right...that was on me....should take nothing you read on ebay as gospel...
i did disassemble and matched the colors to the correct leg so it coincides with the pl docs and wopl docs...
that gave me bias, however high...
2. when i reversed the pl20 board to install the two bias extensions on the back side...i did not reverse the leads...
therefore i had the emitter and collector reversed....
that too is on me...
anyway....dc offset is 0 and -1 mv
the left and right bias are 350 mv dc...
it is playing music...
i cant thank you enough joe...and fellow techs...
joe, your kits are truly outstanding, well thought out and highly organized...and i really enjoyed building them...
i have learned a lot...and i appreciate all of the experience and generosity from phoenix forums...
gotta get the meters lit and reinstalled...
and this evil b**ch has been upgraded....
it was however very interesting....
lol
again...my sincere thanks and gratitude!!!!