PL 400 VU Meter?

[Mohawk]

What are the chances someone has a good 400 meter they can part with ?

M

 

[laatsch55]

Post a pic...

 

[Mohawk]

One of my meters has a slightly different silkscreen and needle....
You gots' one ?

M

 

[Mohawk]

It's hard to tell in the pics but the meters are slightly different and it triggers my OCD !

 

[Gepetto]

Man, OCD runs deep on this forum

 

[Mohawk]

My wife thinks I'm crazy .... "Just leave it alone " she says..... I'm not sure if she was referring to the 400 or her.... So confused...

M

 

[Gepetto]

My wife thinks I'm crazy .... "Just leave it alone " she says..... I'm not sure if she was referring to the 400 or her.... So confused...

M

So you are going to make me tear apart a PL400 parts hulk to see if any of the meters work I have been procrastinating for a long time on that...

 

[laatsch55]

I'll look too Joe .

 

[mlucitt]

So you are going to make me tear apart a PL400 parts hulk to see if any of the meters work

When you take it apart, I need the following parts, if you have them:

1. PL400 Series I attenuator knobs.
2. Both of the fallopian tubes.
3. The commode diodes from the backplane.
4. I have several ON Semi transistors, I need (8) OFF Semi transistors.
5. One Shocking diode.
6. A unit of resistor smoke, I have several resistors which have leaked smoke.
7. A left-handed LED for the Left Channel meter.
8. The magnet that sticks to the copper buss bar.
9. Some of that special nonconductive cardboard that fits above the PL400 fuse holders.
10. And of course, I need a Flux Capacitor.

 

[laatsch55]

You forgot the "Magic Smoke"...

 

[WOPL Sniffer]

Meter Fluid, Military Bearing's, and a Piffilated Nut Wrench

 

[Gepetto]

Hey Mark, I only have the Ballsticks and the accompanying Franistan...

 

[laatsch55]

The White Oak dude and that's all ya got???

 

[WOPL Sniffer]

So you are going to make me tear apart a PL400 parts hulk to see if any of the meters work I have been procrastinating for a long time on that...

I gut a whole amp in 17 minutes Joe,,,,,,

 

[Gepetto]

I gut a whole amp in 17 minutes Joe,,,,,,

Me too Perry but then I have pieces cluttering everything up on the benches.

 

[Mohawk]

Reminds me of one of my favorite training videos... Grab a pencil and paper, take notes !

M

 

[grapplesaw]

Reminds me of one of my favorite training videos... Grab a pencil and paper, take notes !

M

Very funny

 

[nakdoc]

You forgot the standard AGX 10 fuses found in every PL 400

 

[wattsabundant]

You forgot the standard AGX 10 fuses found in every PL 400

Not that it matters, but the standard AGX fuses in a 400 is 5A. The AGC is 10A.

 

[VSAT88]

1. Inverted Mallorator
2. Can of Compression
3. High Speed Turbo Muffler Bearing
4. I Beam Stretcher
5 Snipe
6. Weather Rock
7. Oxygen Free Room (to listen to cable in)
8. Prince Albert (in the can)
9. Wireless Cable
10. Whatever else you got that's cool for free.

No really @mlucitt , that #9. "Some of that special nonconductive cardboard that fits above the PL400 fuse holders." kind of freaked me out when I first opened mine up. I said to my self (out loud) shit somebody has been in here fuckin some shit up !