- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Welcome Sir....I use shielded because it is an AC run.....
Just In Case's PL 400 to Wopl Conversion
- Thread starter laatsch55
- Start date
Welcome Sir....I use shielded because it is an AC run.....
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
You are getting down to the home stretch Lee. Looks good.
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Yep, got a few lined up so I need to get after it...thanks...
Justin Case
New Around These Parts
Thanks for the heads up, Gepetto!
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Justin Case
New Around These Parts
I'm listening!
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Work interfered....power up tonight.
Justin Case
New Around These Parts
As a pirate said once, "ARRRRGH!"
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Amen Steve, tantalizingly close....
Shame that things like making a living have to interfere with our hobby.
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Amen Fred.....
AHEM......power up did not go well......D12L, D12R were put in backwards, AND R11L, and R11R were not even put IN THE BOARD....without R11 in, there is minus voltage about anywhere you want to take a measurement Except on the plus rails....Jeez
All is well now....Offset is .001 on the left, .000 on the right. Bias dialed right in...it will be on the AP after breakfast....
AHEM......power up did not go well......D12L, D12R were put in backwards, AND R11L, and R11R were not even put IN THE BOARD....without R11 in, there is minus voltage about anywhere you want to take a measurement Except on the plus rails....Jeez
All is well now....Offset is .001 on the left, .000 on the right. Bias dialed right in...it will be on the AP after breakfast....
Last edited:
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
I would like to say I had been interrupted a dozen times with emergency calls from the field when I put that board together, but NO....it was during a time when it had my complete attention, absolutely stress free assembly time....so....no excuses...I just F*&^%$ up....
- Joined
- Jan 14, 2011
- Messages
- 75,601
- Location
- Gillette, Wyo.
- Tagline
- Halfbiass...Electron Herder and Backass Woof
Resisual noise is KILLER!! 157uv on the right, 173uv on the left...
Good job Lee. Nice stats.