- Joined
- Oct 15, 2014
- Messages
- 3,419
- Tagline
- ---not quite right
It's an older QSC 1400. It's rated 600w into 8 ohm mono bridged, I'm gonna parallel my subs for 4 ohm and see if I can melt it :E
A few sound guys I know say it will handle 4 ohm bridged, and worst case I guess it's got thermal protection...
If those face plates with the fuse holders are done nicely and not a total butcher job, I may not be opposed to that. My 400 has had a power switch added but was done well enough that I thought it was original until I did some research. Someone installed a turn switch where it said "power level" center of the face place. They must have used a knob from a PL pre amp or did a nice job machining one I'm not stuck on perfect originality, the stuff is just plain cool even with a few battle scars!
A few sound guys I know say it will handle 4 ohm bridged, and worst case I guess it's got thermal protection...
If those face plates with the fuse holders are done nicely and not a total butcher job, I may not be opposed to that. My 400 has had a power switch added but was done well enough that I thought it was original until I did some research. Someone installed a turn switch where it said "power level" center of the face place. They must have used a knob from a PL pre amp or did a nice job machining one I'm not stuck on perfect originality, the stuff is just plain cool even with a few battle scars!
