Old, untouched, unmolested.

Gibsonian

Chief Journeyman
Joined
Aug 3, 2011
Messages
851
#1
1739627826293.png
1739627862968.png

1739627902308.png
Such good condition think I'll set the bias and offset and let her rip to see how it sounds stock. Anyone have the service manual?
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,065
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#4
I would strip the boards like i showed in my fixit posts...
Are the inputs opposite of the outputs?
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,065
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#6
Those were the worst offenders on the board , fuckin bias adjusters....Ohhhhhhhhhh..... they definately got trashed...

It sure cleaned up the tweets on the tri-amp....
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
75,065
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#9
They usually did....my ol bud in Phoenix had a 300 on the topside of his 4.5's.....and a big Bryston on the bottom. The 300 sounded really good....
 

Gibsonian

Chief Journeyman
Joined
Aug 3, 2011
Messages
851
#10
Mine will run the tweeters in the triamp setup. I think it might be better stock than current amp in there, a Yamaha MX1000
 

Gibsonian

Chief Journeyman
Joined
Aug 3, 2011
Messages
851
#12
Will be cool to have the 700 (full WOPL) on the woofs, 400 (full WOPL) on the mids and 300 on the tweets. Full on Phase and White Oak setup. One day the big Model One. I only listened full range when I tried the 300 on another system. But the highs seemed quite good.
 
Top