Cable Distortion

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,915
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#1
Ran some interesting tests just a bit ago. made up some XLR in's to XLR out's and hooked em up to the AP. I had in mind to see what distortion was present in the test cables themselves. Ran THD & N unweighted 10-80k like all the rest of the testing. I don't know what effect generator loading had, as the AP detects impedence automatically and sets the load , either 50, 600, or 20k. NOT EXACTLY surer on the numbers.
The test was run with Carol "CM" 20 gauge twisted pair with foil shield and bare ground. Terminated as a standard XLR connection.
The results were interesting. I had assumed voltage and frequency to have far less effect than there was.

Pics...................
 

Attachments

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,915
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#2
Re: Copper Heatsinks

Further testing of the test cables, this time out to 120KHZ...... It appears at 12 millivolts the cables are contributing a fair amount to the distortion spec.


Starting at 14 Hz it appears the generator was struggling.
 

Attachments

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,915
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#3
So, will smaller cables have less distortion at 12 millivolts than larger cables?
 

mlucitt

Veteran and General Yakker
Joined
Jun 24, 2011
Messages
3,494
Location
Jacksonville, FL
#4
I think we are about to find out...

I think the biggest factor is the capacitance of the cable. It is small, in the pF, but the effect of the capacitance of the cable changes by frequency. Of course, the more cable length, the more capacitance due to the increased area, all other things being equal.
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,915
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#5
That's what I'm finding out. Could we be onto something in the voodoo cable debate?
 

speakerman1

Honorary Forum "Larrt" (ornery too)
Joined
Jun 12, 2010
Messages
12,037
Location
OZONE ALLEY MARS (Visitor)
Tagline
Wasted Days and Wasted Nights
#6
No. Length has to do with freq. in RF. How did you test the cables? Have you tried more than 1 pair? Your capacitance can change due to the way the wire is made. Really I don't know but I stayed at a Holiday Inn last night. LOL

Larry
 

Fairchild

Veteran and General Yakker
Joined
Jun 14, 2010
Messages
2,937
Location
Springpatch, IL
Tagline
It's Beer Season!
#7
This is interesting, the only amp I have with balanced outputs is my Hafler Pro, I am using an XLR adapter pair that I bought. What are your feelings comparing the XLR's to RCA's?

Jim
 

speakerman1

Honorary Forum "Larrt" (ornery too)
Joined
Jun 12, 2010
Messages
12,037
Location
OZONE ALLEY MARS (Visitor)
Tagline
Wasted Days and Wasted Nights
#8
Lee try the oh what are they called. You snap them onto the cables. When in doubt shield. Ferrite beads. To me the shielded shrink tubing is a cool idea.

Larry
 

kevin

Forum Veteran and Hillbilly
Joined
Dec 22, 2011
Messages
1,422
Location
Wise VA
#10
Do yall really think the human ear will ever hear this difference in cables you have found ? OR... Does the fact that the paper tells ya thats it there make ya change them ? I know..... I know..... I have no business in this conversation..... lol...
 

ksrigg

Chief Journeyman
Joined
Jul 28, 2011
Messages
1,451
Location
Wise, Virginia
#11
That is something I have thought about for a long time Kevin. It falls under the study of "psychoacoustics" or the mind telling the ear what it should be hearing...for example..does XYZ cable sound better than ABC cable? Or does this DEF preamp sound better than the TUV preamp.....That is why I would love to have some "double blind" tests performed where people with good ears rate different cables or components without knowing what they are comparing...You'd have to set stuff up so you could do an immediate A-B between the different items you were comparing..

There is someone who has a $10,000.00 prize for anyone who can effectivly choose one piece of speaker cable out over others. I can't remember the particulars but NO ONE has claimed the prize money..I'll have to see if I can find the specifics of the challenge...They are out there on the web somewhere..I've seen it before..
 

kevin

Forum Veteran and Hillbilly
Joined
Dec 22, 2011
Messages
1,422
Location
Wise VA
#14
Lee..... Ive not seen Sutton in a month of Sundays and here it is almost Sunday again..... I never did get the Tara cables...
 

laatsch55

Administrator,
Staff member
Joined
Jan 14, 2011
Messages
74,915
Location
Gillette, Wyo.
Tagline
Halfbiass...Electron Herder and Backass Woof
#15
He is scum!! You must have him come over with a couple pair, then you will see, or hear as the case may be.
 

kevin

Forum Veteran and Hillbilly
Joined
Dec 22, 2011
Messages
1,422
Location
Wise VA
#16
Yea he sure as hell is !!!!!! We gonna try and get togrther here in a day or so.... He has to come down when his other half is at work..... She still thinks we are up to no good when we get together !!!! lol....
 
Top