Search results

I got the meters set yesterday, I let it play about an hour then checked the Bias Everything looked good so, it was time for a systems check to see how it pushes the polks.... :D Thanks for looking Bias before setting back to 350 Left channel.. Right channel.. A little...

A little Montrose to help break in the 700

Cool, Thanks Joe

Hey Joe, I was planning to do this eventually, Now seems like a good time. :D When you have the time, Could you Please send me an invoice on the parts needed for this swap.. Also, Please add me a replacement IC1 for the meter board...

Yes Sir, That's exactly what it was....Good call Lee. Yes Sir, I sure did. Good catch... It was had to see with that picture so dark. I removed it last night and broke one of the pins trying to straighten it out. Those Ic's are a bugger to remove. (At least for me). So I took one of the boards...

That's when the trouble started........... I was bringing it up slow on the variac and DBT, Around 45v the meters lit up looking like this........ Meter switch set on Dot.... Meter switch set on Bar... Since all the test were good after installing last row of transistors, I figured it had...

Finished wiring up the Cylon meters, Switches and RCAs ...... Thanks for looking Ready to adjust the cylon meters....

Moving on to wiring up the RCA inputs, Switches and Cylon meters........Thanks for looking

WOO HOO.........Final row of transistors installed and no issues. No shorts DC ground or B+/B- rails No shorts transistor cans, No blown fuses, smoke, or smells Proper voltage, 0v at the output, Bias looking good Thanks for lookin....... Left Channel Bias Right Channel Bias

Got the 5th row transistors installed with no issues. No shorts from DC ground or B+/B- rails No shorts transistor cans to chassis, No blown fuses, no smoke, or smells Proper voltage, 0v at the output, checked bias about the same Thanks for looking......... Voltages.... Bias readings...

Sorry Lee, It should have read, Do these voltages look right for the +15VL/ -15VL Thanks

Do these look right for the +15VL/ -15VL test points. Right side + Right side - Left side + Left side -

4th row installed no issues......No shorts DC ground or B+/B- rails No shorts transistor cans to chassis, No blown fuses, no smoke, or smells Proper voltages, checked bias again all good 0v at output, pads 11/12 and the +15VL/ -15VL test points. Thanks for looking...

Thanks Lee, I'll need to do some straightening after all the testing's done. Seems Every time I touch the amp wires move.... :D

3rd row of transistors in.... No shorts DC ground or B+/B- rails and transistor cans to chassis No blown fuses, no magic smoke, no smells Proper voltages, checked bias, still good.....Moving on to 4th row Thanks for looking Voltages.... Bias settings....Didn't mess with Left Right