Search results

I like them more gooder than the regular rubber feet. Gives the gear another 1/2" of breathing room...

Hey Eric, I do disconnect the DC ground when checking for shorts from the B+/B- rails and the transistors to the chassis. I reattach when powering up to check voltages. Am I doing wrong ?

Second row transistors in..... No shorts DC ground or B+/B- rails and transistor cans to chassis Reattached ground, powered up.... Relays working, proper voltage, no shorts or blown fuses, no smoke or smell Rechecked the Bias Left 350, Right 348. Everything's looking good. Thanks for looking

Thanks guys, I got a little excited after wiring up the control board. I guess I need to slow down, double check my moves. I believe I'm back on track now. Everything's going more gooder.... Set the Bias.....Left channel Right channel

OOPS....No Sir, I did not..... It's connected now.

Cool, I was holding off continuing on. Since it's nothing major then. Moving on to 2nd row of transistors........

Hey Joe, It was the left channel UF_B- Fuse. I didn't check them. Dim bulb didn't stay lit. I figured everything was good. I know better now. I replaced the fuse, Fired it up 4 times rechecked each time, everything seems normal. Relays kicking in and 0V at the outputs. B+/B- 94v...What do you...

Powered it up, Checked all voltages, no shorts, no blown fuses, no smoke or smells 0V at channel outputs voltage B+/B- 94 ish Voltage coming in the house 113, :D I think TVA's cutting back on the juice..... question....Is it normal for the relays not to kick in once the control board is...

Control board wired in. No shorts from ground or the B+/B- rails to chassis or transistor cans.....

Amen Brother, These WO kits are Awesome....... Thanks Lee, for the kind words. All I can tell you is, I've been learning from the best........ Members here are Awesome..... Thanks Guys

Bottom row of transistors installed No shorts from DC ground, B+/B- rails, or transistor cans to chassis No blown fuses, no shorts, no smoke or funny smells... B+/B- voltage around 104 ish 0V at channel outputs Moving on to installing the Control board....Thanks for looking

Two for Tuesday.....even though it's Monday :D

Woo-Hoo, A successful testing of the bare chassis. No shorts, no smoke or funny smells :D Relays kicked in around 75v, Rail voltage 107.2 / -107.0. Everything looking good. Moving on to installing the bottom row of Transistors today and run some more tests. Thanks for looking........

Yes Sir, Sure do. Thanks for looking out. I appreciate the input. It always helps just in case I miss something .As everyone here has said many times, The more eyes the better.... I'm getting older and I do have that sometimers disease. So, I always have Joes destruction manual open when I'm...

All Backplane and cap wiring run and completed, Trans mounted, Heat sinks mounted, Initial check, No shorts from DC ground or B+/B- rails to chassis. Unless anyone can see something I've missed, I believe I'm Ready to bring up the bare chassis and check voltage. Thanks for looking......