Search results

I would not plug it in... and I would not have anything hooked up to it. ( RCA Inputs, and defiantly not the Speakers) I would open it up and look at the inside and do visual inspection and look at the Board and the caps to see how old they are? and the outside to. Did it work or was it sold as...

I was waiting for the black sharpie marker, which was a old trick. don't know if worked. Looks cool!

What kind of damping are you using for inside the speaker?

What upstream that you turn on? and other devices?

Luckily for you that Parrot is checking everything.

Thanks for taking the time to write this and explained it. :)

Good luck I need to start selling stuff.

Room treatment will help w this.

Thanks So w this test, (I have never done this) So what is the typical voltage range starting at warm temp .350 vdc and at your max (I don't know if I'm that brave to go that far @176 degrees) And what happened if the Bias runs away and is it Temp related? I had more failed Bias transistors than...

In your experiment, The Sx is more of a intergraded amp so it can have more bass at Flat . (Sx is Very Good) you can also use it as a pre amp to the PL have you tied that yet? another fun thing to do.

Thanks for the update Are you running your speakers in series or Parallel?

looks good Joe I like that bridge Rectifier board. it really cleans it up ;) so much easier to install to. I'm also doing something similar to the RCA inputs , still going to solder the nuts in and I have a wire that under the nuts and is lifted it up between the 2 so I can easily solder the...

W the Skipper Joe and all the rest of the crew. Happy posts and Wow everything Sounds Good! Horns

Will they support both? I think you said the 2N5088 was a little better?

No, How flexible is it?

Never had that happened, its thicker than I want it to be

I have some NTE192A and stock 2N3403 , 2N5088, BD139 so the 2N5088 is the best for less noise and longer wires w the Original backplane? Thanks Joe back to this https://www.ebay.com/itm/185093744057

But everything is fixed and WORKS! what 3 amps? I seen thread that had a lot of post and they never fixed the amp.

BNTECHGO 22 Gauge Silicone Wire Kit 7 Color Each 50 ft Flexible 22 AWG Stranded Tinned Copper Wire...

Do you need P-straps? lol All the wire could Break. Ever time I moved the Org PL Board I always had to look for broken wires. One time I put the control back in and it worked. The control board had a broken wire and it touched the solder pad and worked. than later I took the board off and the...