Recent content by yeliab1

TurboGlide This is my 1988 FLHTC. 82 cube, welded crank, piston cooling nozzles, coated Wisecos, H-beam rods, bath tub chamber dual plug heads, Daytona TwinTech ignition w/boost retard, blow thru Mikuni 42mm, 25/36 primary gearing, and a whole bunch of other stuff that I don't want to bore you...

Thanks Thank all of you for the birthday wishes. It's not been the best birthday but at least I'm still breathin'!! I have my 700B back home for the second time. I have a video of it playing and the repair work that was done to it. Could you guys lay an eye ball on this and see what I have...

Well thank you very much!!

Yes, stock amp. It always worked fine and thought I'd have it "gone through". I appears I took the wrong approach. I'll look the fuses over when I get to the house. It's a long way to ship this, but I understand that you are "the guy" to have do repairs. I wish I'd have spent my money with you...

I sent my 700B off to a "reputable business" to be refurbished. I had it re-capped, and protection board installed. I've used it @ an hour and the right channel is failing. At anything over 1/2 volume, the channel is raspy, and sounds like the back is coming off the cabinet. I got in touch with...

Black face plates Who is supplying these face plates? I'd sure like one for my B. Thanks

Wire Fire Hello, I'm not an electrician, but... Pull some 10/3 romex and use a 220 volt 30 amp plug. Skip a breaker in the box so you have 2, 110 volt, 30 amp circuits at the receptacle / AV cabinet.

I think you're right I took your advice. Well, kind of. I bought a 700 II,with fresh re-cap. I was going to run the Klipsch on the PM-900 and use the 700 B on the subs. And...I thought what a waste that would be. So I bought a second 700. It's a Series II, I know, but it should work out...

I saw these guys at Indy, with a 70 piece orchestra and vocal accompaniment. In-credible!!

Yes, it is. You picked right up on that. Most people, don't. I think I like it here already!

700B

PL700B and CF-3's I am having speaker protection installed during the refurbish. Thanks for the quick replies. I read that these speakers are 8 ohm nominal. I also saw an impedance curve on another 8 ohm klipsch speaker, and it dipped to 2 ohms. I don't want to burn my "new" amp down...

Hello, I just joined your forum and this is my first post. I've been reading about the mods being done to PL amps. I figure this is the best place to get my information. I have a 700B that I've owned for years. It is due back from being refurbished. I always ran a pair of Klipsch CF-3's with it...