TelRay's latest activity

Thank you for the reply @WOPL Sniffer This is a conversation @berndt and I had when working on a PL400 together and after doing some...

yep, i am considering this my backup solution (the WO LED kit)

Quick update on the donor transformer testing. I've got B+ 100V B- 100V (the original power caps that i measured to be at 9,000 -10,000...

Hahahahaah... I agree, Joe! :) Thanks for all the help with the PL400 over the past few weeks. I measured it at Peter’s (Quirk Audio)...

Federico, I would only use that transformer if you customer demanded really clean power... :-)

D5 is 5% deoxit (95% contact cleaner) and D100 is "pure" DeOxit. More economical where you can use and wash out with less expensive...

thank you all for the replies and guidance! i'll try to measure the output voltages on the donor transformer in a few days and report...

I would do the deoxit . Had a bunch of controller circuit boards off the Magnetek BDP-515 drives that had rust between every pin on...

Hello everyone, I’d like to take this opportunity to both introduce myself and breathe new life into this thread. Part 1: Introduction...