TelRay's latest activity

thank you Bill, I hope I can bring it back to life ;) Thank you for your generosity!

It's really nice to see Federico caring the torch on this project

I hope for the same ;) The hairspin wasn't moving and now it is (after applying the D100 liquid and cleaning with the D5 spray), i think...

TelRay, you can, of course, run your own research on the ground issue, but as Perry has indicated it's a dead horse, beaten repeatedly...

Well... after a lot of mechanical "disintegration" work, the chassis is clean and with no sign of water / rust (i have to say: kudos...

Most wire direct and bypass this rather useless switch...(like in the PL400 you just completed). Some mount the switch for decoration...

Personally, I would bypass it. It's another failure point and not the best switch (possibly the worst one in fact).

I remove them and cover the hole.

thk Joe, like Lee Sklar's famous "useless" switch on his bass guitar... he was fooling most engineers by flipping the switch and asking...

thanks so much! Do you think this is something to be kept? I mean... if the Aerosmith techs removed it ;)

That's what I was thinking too, but I don't see any single ended inputs... could be it ignores the third leg when used with a TS rather...

It is a balanced input conversion board Federico. If you got this donor amp from Lee, it is probably part of the Aerosmith amp tranche...

thank you, it might as well be the case as the information I had from @berndt is that this was one of the Aerosmith PA PL700s donated by...

Good morning all, I was taking a good look at the transformer "donor" amp S/N 5832 and the "receiving" one S/N1273/0888 amnd have a...

No ground, use same type cable